Hitachi CP-A300N User Manual - Page 101
Phenomena that may be easy to be mistaken for machine defects continued
View all Hitachi CP-A300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect The signal cables are not correctly connected. Correctly connect the audio cables. Reference page 9 ~ 13 Sound does not come out. The MUTE function is working. Restore the sound pressing MUTE or VOLUME +/- button on the remote control. The volume is adjusted to an extremely low level. Adjust the volume to a higher level using the menu function or the remote control. 20 20, 45, 46 The AUDIO SOURCE/SPEAKER setting is not correct. Correctly set the AUDIO SOURCE/SPEAKER in AUDIO menu. The mode selected for HDMI AUDIO is not suitable. Check each of the two modes provided and select the suitable one for your HDMITM audio device. The signal cables are not correctly connected. Correctly connect the connection cables. 45 46 9 ~ 13 The brightness is adjusted to an extremely low level. Adjust BRIGHTNESS to a higher level using the menu function. 32 The computer cannot detect the projector as a plug and play monitor. Make sure that the computer can detect a plug and play 10 monitor using another plug and play monitor. The BLANK screen is displayed. Press BLANK button on the remote control. 27 No pictures are The USB TYPE B port is selected as the picture input displayed. source even if MOUSE is selected for USB TYPE B. Select USB DISPLAY for USB TYPE B in OPTION menu to 54 project the picture input to the port. Otherwise select other port for picture input. The projector does not recognize the USB storage device inserted into USB TYPE A port. Use the REMOVE USB function first, remove the USB storage device, and then insert it into the port again. Before removing the USB storage device, be sure to use 12 the REMOVE USB function on the thumbnail screen, which appears when the USB TYPE A port is selected as the input source. (continued on next page) 101