Hitachi CP-X2010 User Manual - Page 35

Item SETUP menu Description Using the ▲/▼ buttons switches the mode for mirror status. MIRROR NORMAL  H:INVERT  V:INVERT  H&V:INVERT STANDBY MODE MONITOR OUT If the Transition Detector is on and MIRROR status is changed, TRANSITION DETECTOR ON alarm (50) will be displayed when projector is restarted after the AC power is turned off. Using ▲/▼ buttons switches the standby mode setting between NORMAL and SAVING. SAVING  NORMAL When SAVING is selected, the power consumption in the standby mode is lowered with some functional restriction as below: • When SAVING is selected, the RS-232C communication control is disabled except to turn the projector on while the projector is in the standby mode. • When SAVING is selected, AUDIO OUT STANDBY setting of AUDIO SOURCE (36) is invalid, and no signal is output from AUDIO OUT ports in the standby mode. The combination of a picture shown on screen and output from the MONITOR OUT port can be arranged in the menu. The picture coming into the port selected in the (2) is output to the MONITOR OUT port while an image from the port chosen in the (1) is on screen. (1) Choose a picture input port using ▲/▼ buttons. COMPUTER IN1  COMPUTER IN2  STANDBY  COMPONENT VIDEO  S-VIDEO  (Y, Cb/Pb, Cr/Pr) • Choose STANDBY, to select the output signal from the MONITOR OUT port in the standby mode. (2) Select one of the COMPUTER IN ports using ◄/► buttons. Choosing the COMPUTER IN1 allows the following choice. COMPUTER IN1  OFF Choosing the COMPUTER IN2 allows the following choice. COMPUTER IN2  OFF Choosing other input or STANDBY allows the following choice. COMPUTER IN1  COMPUTER IN2  OFF • OFF disables the MONITOR OUT port. 35