Hitachi CP X206 User Manual
Hitachi CP X206 - XGA LCD Projector Manual
 |
UPC - 050585151451
View all Hitachi CP X206 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi CP X206 manual content summary:
- Hitachi CP X206 | User Manual - Page 1
Projector CP-X206/CP-X306 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read "Safety Guide in this manual. • The reproduction, transfer or copy of all or any part of this - Hitachi CP X206 | User Manual - Page 2
, Operating 16 Auto on, Auto off, Lamp time, Adjusting the volume 16 Filter time, My button, Temporarily muting the sound. . . . . . 16 My source, Service, Security Selecting an input signal 16 NETWORK menu 54 Searching an input signal 17 Setup, Projector name, My image, Selecting an aspect - Hitachi CP X206 | User Manual - Page 3
realizes the large projection image, even if in a small space. ü The new double layer filter system is expected to function longer and offers you less maintenance frequency. ü This projector can be controlled and monitored via LAN connection. Preparations Contents of package Please see the - Hitachi CP X206 | User Manual - Page 4
Part names Part names Projector (1) Lamp cover (&60) The lamp unit is inside. (2) Focus ring (&18) (3) Zoom ring (&18) (4) Control panel (&5) (5) Elevator buttons (x 2) (&18) (6) Elevator feet (x 2) (&18) (7) Remote sensor (&13) (8) Lens (&65) (9) Lens cover (&3) (10) Intake vents (11) Filter - Hitachi CP X206 | User Manual - Page 5
Part names Control panel (1) STANDBY/ON button (&15) (2) INPUT button (&16, 22) (3) M ENU button (&22) It consists of four cursor buttons. (4) POWER indicator (&15, 67) (5) TEMP indicator (&67) (6) LAMP only when the projector is not turned off by normal procedure, since pushing this switch - Hitachi CP X206 | User Manual - Page 6
Part names Remote control (1) VIDEO button (&17) (2) COMPUTER button (&16) (3) SEARCH button (&17) (4) STANDBY/ON button (&15) (5) ASPECT button (&17) (6) AUTO button (& MENU ESC ENTER RESET (10) (4) (3) (7) (12) (14) (11) (13) (15) (18) (21) (23) (25) (26) Back of the remote control - Hitachi CP X206 | User Manual - Page 7
projector according to the environment and manner the projector will be used in. Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. - Hitachi CP X206 | User Manual - Page 8
CP-X306> The values shown in the table are calculated for a full size screen: 1024×768 a Screen size (diagonal) b Projection distance (±10%) c1 , c2 Screen height (±10%) On a horizontal surface Suspended from the ceiling • Keep a space of 30 cm or more between the sides of the projector 216 206 81 - Hitachi CP X206 | User Manual - Page 9
or dusty place. Placing the projector in such places could cause fire, electric shock and/or malfunction of the projector. • Do not place the projector near humidifiers, smoking spaces or a kitchen. ►Position the projector to prevent light from directly hitting the projector's remote sensor. - Hitachi CP X206 | User Manual - Page 10
your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices the device and the projector. ►Use appropriate accessory or designated cables. Ask your dealer about nonaccessory cables which may be required a specific length or a ferrite - Hitachi CP X206 | User Manual - Page 11
to any network that might have the excessive voltage. - Some signal may need an adapter to input this projector. - Some PCs have multiple screen display modes that may include some signals which are not supported by this projector. - Although the projector can display signals with resolution up - Hitachi CP X206 | User Manual - Page 12
chain or wire up to 10 mm in diameter can be attached to the security bar on the projector. Also this product has the security slot for the Kensington lock. For details, see the manual of the security tool. Anti-theft chain or wire Security slot Security bar WARNING ►Do not use - Hitachi CP X206 | User Manual - Page 13
the battery cover, remove it. 2. Align and insert the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals as indicated in the remote control. 3. Replace the battery cover in the direction of the arrow and snap it back into place. WARNING ►Always handle - Hitachi CP X206 | User Manual - Page 14
REMOTE FREQ. in the SERVICE item of the OPTION menu (45) of the projector to be controlled should be set to the same mode as the remote your PC's manuals before connecting 's configurations and mouse drivers. - You cannot projector is working properly. This function is not available while the lamp - Hitachi CP X206 | User Manual - Page 15
3. Press STANDBY/ON button on the projector or the remote control. The projection lamp will light up and POWER indicator will projector on for about 10 minutes or more after turning it off. Turning the projector on again too soon could shorten the lifetime of some consumable parts of the projector - Hitachi CP X206 | User Manual - Page 16
keep checking the ports in above order repeatedly till an input signal is detected. 1. Press COMPUTER button on the remote control. Each time you press the button, the projector switches its input port from the current port as below. COMPUTER IN 1 COMPUTER IN 2 COMPUTER button MY SOURCE/ VIDEO - Hitachi CP X206 | User Manual - Page 17
in above order repeatedly till an input signal is detected. Selecting an aspect ratio 1. Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. For a computer signal NORMAL 4:3 16:9 SMALL F or a video signal - Hitachi CP X206 | User Manual - Page 18
the elevator feet. 4. After making sure that the elevator feet are locked, put the projector down gently. 5. If necessary, the elevator feet can be manually twisted to make more precise adjustments. Hold the projector when twisting the feet. To loose an elevator foot, push the elevator button on - Hitachi CP X206 | User Manual - Page 19
when the FINE or DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (44). MY SOURCE/ VIDEO COMPUTER DOC.CAMERA to reset the operation, press RESET button on ESC RESET the remote control during the operation. To complete this operation, press POSITION button - Hitachi CP X206 | User Manual - Page 20
following. (1) AUTO executes automatic vertical keystone correction. (2) MANUAL displays a dialog for keystone correction. Use the ▲/▼ buttons to normal, press the OFF button of MAGNIFY on the remote control. ● The projector automatically exits from the MAGNIFY mode when the input signal is - Hitachi CP X206 | User Manual - Page 21
continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long. Temporarily blanking the screen 1. Press BLANK button on the remote control. The BLANK screen will be displayed instead of the screen - Hitachi CP X206 | User Manual - Page 22
Using the menu function This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK, C.C. and EASY MENU. ON MAGNIFY OFF POSITION 1. Press the MENU button on the remote control or the projector. The Advanced Menu or EASY MENU, which has priority just - Hitachi CP X206 | User Manual - Page 23
certain input port is selected, or when a certain input signal is displayed. ● When you want to reset the operation, press RESET button on the remote control during the operation. Note that some items (ex. LANGUAGE, H PHASE, VOLUME) cannot be reset. ● In the Advanced Menu, when you want to return - Hitachi CP X206 | User Manual - Page 24
EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item ASPECT AUTO KEYSTONE EXECUTE KEYSTONE Description Using the ◄/► buttons switches the mode for aspect ratio. - Hitachi CP X206 | User Manual - Page 25
. See FILTER TIME item in OPTION menu (42). Using the ◄/► buttons changes the display language. See LANGUAGE item in SCREEN menu (37). Select Go to Advanced Menu... on the menu, and press the ► or ENTER button to use the menu of PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK or - Hitachi CP X206 | User Manual - Page 26
PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item BRIGHTNESS CONTRAST GAMMA - Hitachi CP X206 | User Manual - Page 27
PICTURE menu (continued) PICTURE menu Item COLOR TEMP COLOR TINT Description Using the ▲/▼ buttons switches the color temperature mode. #1 HIGH � #1 CUSTOM � #2 MID � #2 CUSTOM � � #6 CUSTOM #3 LOW � � #6 Hi-BRIGHT-3 #3 CUSTOM � � #5 CUSTOM � #5 Hi-BRIGHT-2 � #4 CUSTOM � #4 Hi-BRIGHT - Hitachi CP X206 | User Manual - Page 28
There may be some noise and/or the screen may flicker for a moment when an adjustment is made. This is not a malfunction. This projector has 4 memories for adjustment data (for all the items of PICTURE menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER button performs each - Hitachi CP X206 | User Manual - Page 29
and component video signal. • When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small. Using the ▲/▼ buttons adjusts the vertical position. Up ó Down • Over-adjusting the vertical position may cause noise to appear on - Hitachi CP X206 | User Manual - Page 30
When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment by pressing the RESET button during this operation. Executing this item performs DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (44). 30 - Hitachi CP X206 | User Manual - Page 31
2-3 Pull-Down conversion system. But these may cause a certain defect (for example, jagged line) of the picture for a quick moving object. In such a case, please select TURN OFF required for a SCART RGB input to the projector. For your reference, see the TECHNICAL part. (continued on next page) 31 - Hitachi CP X206 | User Manual - Page 32
. • When the TURN ON is selected, the moving pictures are displayed more smoothly. • This function may cause a certain degradation of the picture. In such a case, please select TURN OFF. The computer input signal type for COMPUTER IN1 and IN2 ports can be set. (1) Use the ◄/► buttons to select the - Hitachi CP X206 | User Manual - Page 33
IN1 and IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. The RESOLUTION menu will be displayed. (2) In the RESOLUTION menu, select the resolution you wish to display using the ▲/▼ buttons. Selecting AUTO will - Hitachi CP X206 | User Manual - Page 34
to the (forward/backward) setup angle by itself. This function will be executed only once when selected in the menu. When the slant of the projector is changed, execute this function again. • The adjustable range for correction will vary among inputs. For some input, this function may not work well - Hitachi CP X206 | User Manual - Page 35
mode is lowered with some functional restriction as below: • When SAVING is selected, the communication control (RS-232C, network) is disabled except to turn the projector on while the projector is in the standby mode. • When SAVING is selected, any setting of the MONITOR OUT ( below) and AUDIO - Hitachi CP X206 | User Manual - Page 36
C.C. (Closed Caption) is automatically activated, if the C.C. is set to AUTO in the DISPLAY menu of the C.C. menu and the signal from the input port supports the C.C. feature (59). 36 - Hitachi CP X206 | User Manual - Page 37
NEDERLANDS � � SUOMI PORTUGUÊS � � SVENSKA Using the buttons adjusts the menu position. MENU POSITION To quit the operation, press MENU button on the remote control or keep no operation for about 10 seconds. Using the ▲/▼ buttons switches the mode for the BLANK screen. The BLANK screen - Hitachi CP X206 | User Manual - Page 38
SCREEN menu SCREEN menu (continued) Item Description Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF START UP MyScreen MyScreen ORIGINAL TURN OFF Feature - Hitachi CP X206 | User Manual - Page 39
by changing The indication of the PICTURE MODE displayed by changing The indication of the MY MEMORY displayed by changing The indication of "FREEZE" and "II" while the projector is in the FREEZE mode. • If the projector goes into the FREEZE mode while the TURN OFF is selected, the picture on screen - Hitachi CP X206 | User Manual - Page 40
SCREEN menu SCREEN menu (continued) Item SOURCE NAME TEMPLATE Description Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu - Hitachi CP X206 | User Manual - Page 41
or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table. OPTION is started from the current port. Then when an input is found, the projector will stop searching and display the image. COMPUTER IN1 COMPUTER IN2 VIDEO - Hitachi CP X206 | User Manual - Page 42
TIME FILTER TIME When the time is set to 0, the projector is not turned off automatically. When the time is set to 1 to 99, and when the passed time with nosignal or an unsuitable signal reaches at the set time, the projector lamp will be turned off. If one of the projector's buttons or the remote - Hitachi CP X206 | User Manual - Page 43
SERVICE Description This item is to assign one of the following functions to MY BUTTON 1 and 2 on the remote control NETWORK -INFORMATION- OFF When an input signal is not found: NETWORK -INFORMATION- OFF • AUTO KEYSTONE : Performs automatic keystone distortion correction (34). • MY MEMORY - Hitachi CP X206 | User Manual - Page 44
FAST ó DISABLE SERVICE (continued) FINE projector, environment around the projector, etc., the automatic adjustment may not work correctly. In such a case, please choose DISABLE to disable the automatic adjustment, and make adjustment manually PASSED AFTER THE LAST FILTER CHECK" will appear after - Hitachi CP X206 | User Manual - Page 45
function does not have any effect on the remote control. REMOTE FREQ. Use the ▲/▼ button to change the projector's remote sensor setting. 1:NORMAL ó 2:HIGH Items initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE, SECURITY and NETWORK settings are not reset. RESET ï CANCEL (continued on - Hitachi CP X206 | User Manual - Page 46
OPTION menu OPTION menu (continued) Item SECURITY Description This projector is equipped with security functions. User registration is required before using the security functions. Please ask your local dealer. 1. Using Security Features 1.1 Inputting the PASSWORD 1.1-1 Use the ▲/▼ buttons on the - Hitachi CP X206 | User Manual - Page 47
and hold the INPUT button for 3 seconds while pressing the ► button on the projector. The 10-digit Inquiring Code will be displayed. • If there is no key input digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. SECURITY (continued) 2. Using the - Hitachi CP X206 | User Manual - Page 48
dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. 3. Using the PIN LOCK Function PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 3.1 Registering the PIN Code 3.1-1 Use the - Hitachi CP X206 | User Manual - Page 49
Input a 4 part PIN Code using the COMPUTER remote control for 3 seconds, or press and hold the INPUT button for 3 seconds while pressing the ► button on the projector projector will turn off. 3.3-2 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user - Hitachi CP X206 | User Manual - Page 50
menu to display the input signal. If the Transition Detector alarm is displayed for about 5 minutes, the lamp will turn off. This function will activate only when the projector is started after turning off the AC power. 4.2 Setting the Transition Detector PASSWORD 4.2-1 Use the ▲/▼ buttons on - Hitachi CP X206 | User Manual - Page 51
-digit Inquiring Code will be displayed inside the box. 4.4-3 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed. (continued on next page) 51 - Hitachi CP X206 | User Manual - Page 52
OPTION menu OPTION menu (continued) Item SECURITY (continued) Description 5. Using the MY TEXT PASSWORD function This item allows you to display your own message (MY TEXT) on the START UP screen and INPUT-INFORMATION. It can be protected by a password to prevent it from being overwritten. 5.1 - Hitachi CP X206 | User Manual - Page 53
the PASSWORD during this time. NOTE PASSWORD BOX Pressing the ENTER button on the remote control or INPUT button on the projector will return to the MY TEXT PASSWORD on/off menu. When the PASSWORD is code. Your PASSWORD will be sent after your user registration information is confirmed. 53 - Hitachi CP X206 | User Manual - Page 54
NOTE • If you are not utilizing SNTP ( Date/Time Settings of the User's Manual - Network Guide), then you must set the DATE AND TIME (55) during the initial installation. • The network communication control is disabled while the projector is in standby mode if the STANDBY MODE item of SETUP menu - Hitachi CP X206 | User Manual - Page 55
Use the buttons to enter the Year (last two digits), Month, Date, Hour and Minute. • The projector will override this setting and retrieve DATE AND TIME information from the Time server when SNTP is enabled. ( Date/Time Settings of the User's Manual - Network Guide) (continued on next page) 55 - Hitachi CP X206 | User Manual - Page 56
NAME Description (1) Use the▲/▼ buttons on the NETWORK Menu to select the PROJECTOR NAME menu and press the ► button. The PROJECTOR NAME dialog will be displayed. (2) The current PROJECTOR NAME will be displayed on the first 3 lines. If not yet written, the lines will be blank. Use the buttons - Hitachi CP X206 | User Manual - Page 57
projector. Use the ▲/▼ buttons to select an item which is a still image by the MY IMAGE ( MY IMAGE (Still Image Transfer) Display of the User's Manual - Network Guide remote control. To erase the image displayed and its source file in the projector. (1) P ress the RESET button on the remote - Hitachi CP X206 | User Manual - Page 58
indicate "0.0.0.0" when DHCP is ON and the projector has not gotten address from DHCP server. Executing this item restarts and initializes the network functions. Choose the RESTART using the button ►. SERVICE Then use the button ▲ to execute. Network will be once cut off when choose restart - Hitachi CP X206 | User Manual - Page 59
video or 480i@60 format component video source supporting C.C. feature to utilize this function. Item on equipment or signal source. In this case, please turn off the Closed Caption. Select information such as news reports or a TV program guide. The information covers the entire screen. Not all - Hitachi CP X206 | User Manual - Page 60
Replacing the lamp lamp cover 1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes. 2. Prepare a new lamp. If the projector is mounted on a ceiling, or if the lamp has broken, also ask the dealer to replace the lamp. In case of replacement - Hitachi CP X206 | User Manual - Page 61
In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken. • Do not use the projector with the lamp cover removed. At the lamp replacing, make sure that the screws are screwed in firmly. Loose screws could result in damage or - Hitachi CP X206 | User Manual - Page 62
with your dealer and tell the following type number. Type number : MU05611 When you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. 1. Turn the projector off, and unplug the power cord. Allow the - Hitachi CP X206 | User Manual - Page 63
or too soiled. • When you replace the projection lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication about - Hitachi CP X206 | User Manual - Page 64
uses a battery. When the clock of the network function does not work correctly, please try solution by replacement of the battery: HITACHI MAXELL, part number CR2032. Slot Cover 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure - Hitachi CP X206 | User Manual - Page 65
not touch the lens directly with your hand. Caring for the cabinet and remote control Incorrect care could have adverse influence such as discoloration, peeling paint, etc. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. 2. After making sure that the - Hitachi CP X206 | User Manual - Page 66
to your dealer or service company. Otherwise if a problem occurs with the projector, the following checks and measures are recommended before requesting repair. If this does not resolve the problem, please contact your dealer or service company. They will tell you what warranty condition is applied - Hitachi CP X206 | User Manual - Page 67
Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER LAMP TEMP indicator indicator indicator Description Lighting Turned Turned The projector is in a standby state. - Hitachi CP X206 | User Manual - Page 68
. Please refer to Schedule Settings section of User's Manual-Network Guide. NOTE • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord, and wait at - Hitachi CP X206 | User Manual - Page 69
outage (blackout), etc. Please disconnect the power plug from the power outlet, and allow the projector to cool down at least 10 minutes, then turn the power on again. Either there is no lamp and/or lamp cover, or either of these has not been properly fixed. Please turn the power off and - Hitachi CP X206 | User Manual - Page 70
Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Sound does not come out. No pictures are displayed. Cases the menu function or the remote control. The AUDIO/SPEAKER setting . The computer cannot detect the projector as a plug and play monitor - Hitachi CP X206 | User Manual - Page 71
appear dark. Pictures appear blurry. RS-232C does not work. Network does not work. Cases not involving a machine defect The FREEZE function is working. Press item in the SETUP menu. The lamp is approaching the end of its product lifetime. Replace the lamp. Either the focus and/or horizontal phase - Hitachi CP X206 | User Manual - Page 72
Specifications Specifications Specification Item Specification Product name Liquid crystal projector Liquid Panel size 1.6 cm (0.63 type) Crystal Drive system TFT active matrix Panel Pixels 786,432 pixels (1024 horizontal x 768 vertical) Zoom lens, Lens F=1.7 ~ 1.9 - Hitachi CP X206 | User Manual - Page 73
Specifications (continued) Specifications BATTERY 117 129 270 340 [unit: mm] 73
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
 |
 |
±
Projector
CP-X206/CP-X306
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” first. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
• Mac is a registered trademark of Apple Inc.
• Microsoft and Windows are registered trademarks of Microsoft Corporation.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
• PowerPC is a registered trademark of International Business Machines
Corporation.
All other trademarks are the properties of their respective owners.