Hitachi CP X206 Technical Manual

Hitachi CP X206 - XGA LCD Projector Manual

Get Hitachi CP X206 - XGA LCD Projector PDF manuals and user guides
UPC - 050585151451
View all Hitachi CP X206 manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi CP X206 manual content summary:

  • Hitachi CP X206 | Technical Manual - Page 1
    Projector CP-X206/CP-X306 User's Manual (detailed) Technical Example of PC signal Resolution (H x cases. Refer to the number of display pixels above. • Although the projector can display signals with resolution up to UXGA (1600x1200), the signal will be converted to the projector's panel resolution
  • Hitachi CP X206 | Technical Manual - Page 2
    set signals Initial set signals The following signals are used for the initial settings. The signal timing of some PC models may be different. In such case, adjust the items V POSITION and H POSITION in IMAGE menu. Back porch (B) Front porch (D) Back porch (b) Front porch (d) Data H. Sync
  • Hitachi CP X206 | Technical Manual - Page 3
    Connection to the ports A Connection to the ports LAN B C A COMPUTER IN1, B COMPUTER IN2, C MONITOR OUT D-sub 15pin mini shrink jack • Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive) • H/V. sync. Signal: TTL level (positive/negative) • Composite sync. Signal: TTL level
  • Hitachi CP X206 | Technical Manual - Page 4
    G H COMPONENT VIDEO D Y, E Pb/Cb, F Pr/Cr RCA jack x3 • System: 480i@60, 480p@60, 576i@50, 720p@50/60, 1080i@50/60 Port Signal Y Brightness signal, 1.0Vp-p, 75Ω terminator 3 Ground 4 Ground H VIDEO RCA jack • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43 • 1.0±0.1Vp-p, 75Ω terminator 
  • Hitachi CP X206 | Technical Manual - Page 5
    mVrms 1kΩ output impedance To input SCART RGB signal; ex.: SCART connector (jack) 㪩 SCART cable (plug) RCA plugs To input SCART RGB signal to the projector, use a SCART to RCA cable. Connect the plugs refer to above ex.. For more reference, please consult your dealer. 
  • Hitachi CP X206 | Technical Manual - Page 6
    Connection to the ports (continued) P LAN O N N USB 43 USB B type jack Pin Signal 12 1 +5V 2 - Data 3 + Data 4 Ground O CONTROL D-sub 9pin plug • About the details of RS-232C communication, please refer to the following page. Pin Signal 1 (No connection) 2 RD 3 TD Pin Signal 4 (
  • Hitachi CP X206 | Technical Manual - Page 7
    port of the computer Connecting the cable 1. Turn off the projector and the computer. 2. Connect the CONTROL port of the projector with a RS-232C port of the computer by a RS-232C cable (cross). Use the cable that fulfills the specification shown in the previous page. 3. Turn the computer on, and
  • Hitachi CP X206 | Technical Manual - Page 8
    projector. Header + Command data ('01H' + '00H' + type (2 bytes) + setting code (2 bytes)) (2) The projector changes the setting based on the above setting code. (3) The projector projector cannot properly receive the command. In such a case code, the projector ignore the excess projector receives an undefined
  • Hitachi CP X206 | Technical Manual - Page 9
    [Enable] check box for the [Authentication] setting when authentication is required. Default setting is "Disable". Click the [Enable] check box to open [Network Control Port2 (Port: 9715)] to use TCP #9715. Default setting is "Enable". Click the [Enable] check box for the [Authentication] setting
  • Hitachi CP X206 | Technical Manual - Page 10
    Command Control via the Network (continued) Command Format [TCP #23] 1. Protocol Consist of header (7 bytes) + command data 1 2 Classification Content Set Change setting to desired value. Get Read projector internal setup value. 4 Increment Increment setup value by 1. 5 Decrement
  • Hitachi CP X206 | Technical Manual - Page 11
    Network (continued) Decreasing the projector setting value (Decrement command) (1) The PC sends the following decrement code to the projector. Header + Command data ('05H' + '00H' + type (2 bytes) + '00H' + '00H') (2) The projector the projector cannot properly receive the command. In such a case,
  • Hitachi CP X206 | Technical Manual - Page 12
    is same as the connection ID data on the sending data format) is attached to the Network control commands reply data. ACK reply: '06H' + 'xxH' NAK reply: '15H 1CH' + 'xxxxH' + 'xxH' Data reply: '1DH' + 'xxxxH' + 'xxH' Projector busy reply: '1FH' + 'xxxxH' + 'xxH' Authentication error reply: '1FH' + '
  • Hitachi CP X206 | Technical Manual - Page 13
    Command table RS-232C communication/Network Command table Names Power Operation Type Set error] 08 00 [Filter error] 01 00 [Cover error] 05 00 [Air flow error] 09 00 (Filter missing error) 02 00 [Fan error] 06 00 [Lamp time error] 10 00 (Inner Sencer error) 03 00 [Lamp error] 07 00
  • Hitachi CP X206 | Technical Manual - Page 14
    RS-232C communication/Network Command table (continued) Names Operation Type User Gamma Pattern Set User Gamma Point 1 User Gamma Point 2 User Gamma Point 3 User Gamma Point 4 User Gamma Point 5 User Gamma Point 6 User Gamma Point 7 User Gamma Point 8 COLOR TEMP Set COLOR TEMP GAIN R COLOR TEMP
  • Hitachi CP X206 | Technical Manual - Page 15
    RS-232C communication/Network Command table (continued) Names Operation Type COLOR TEMP GAIN B COLOR TEMP OFFSET R COLOR TEMP OFFSET G COLOR TEMP OFFSET B COLOR COLOR Reset TINT TINT Reset SHARPNESS SHARPNESS Reset MY MEMORY Load Set MY MEMORY Save Set PROGRESSIVE Set VIDEO NR Set ASPECT
  • Hitachi CP X206 | Technical Manual - Page 16
    RS-232C communication/Network Command table (continued) Names Operation Type OVER SCAN OVER SCAN Reset V POSITION V POSITION Reset H POSITION H POSITION Reset H PHASE H SIZE H SIZE Reset AUTO ADJUST COLOR SPACE
  • Hitachi CP X206 | Technical Manual - Page 17
    RS-232C communication/Network Command table (continued) Names Operation Type FRAME LOCK - Set COMPUTER1 FRAME LOCK - Set COMPUTER2 COMPUTER IN1 Set COMPUTER IN2 Set KEYSTONE V KEYSTONE V Reset AUTO KEYSTONE
  • Hitachi CP X206 | Technical Manual - Page 18
    RS-232C communication/Network Command table (continued) Names Operation Type Set MONITOR OUT COMPONENT Set MONITOR OUT - STANDBY VOLUMECOMPUTER1 VOLUMECOMPUTER2 VOLUMECOMPONENT VOLUME-S-VIDEO VOLUME-VIDEO VOLUME - AUDIO OUT STANDBY
  • Hitachi CP X206 | Technical Manual - Page 19
    RS-232C communication/Network Command table (continued) Names Operation Type AUDIO-S-VIDEO Set AUDIO-VIDEO Set AUDIO OUT STANDBY Set REMOTE FREQ. Set NORMAL REMOTE FREQ. Set HIGH LANGUAGE Set AUDIO1 AUDIO2 AUDIO3 Turn off Get AUDIO1 AUDIO2 AUDIO3 Turn off Get AUDIO1 AUDIO2 AUDIO3 Turn
  • Hitachi CP X206 | Technical Manual - Page 20
    RS-232C communication/Network Command table (continued) Names Operation Type BLANK Set BLANK On/Off Set START UP Set MyScreen LOCK Set MESSAGE Set TEMPLATE Set AUTO SEARCH Set AUTO KEYSTONE Set AUTO ON Set AUTO OFF LAMP TIME LAMP TIME Reset FILTER TIME FILER TIME Reset MyScreen
  • Hitachi CP X206 | Technical Manual - Page 21
    RS-232C communication/Network Command table (continued) Names Operation Type Header MY BUTTON-1 Set COMPUTER1 BE EF 03 BE EF 03 06 00 AUTO KEYSTONE V BE EF 03 06 00 MY MEMORY BE EF 03 06 00 PICTURE MODE BE EF 03 06 00 FILTER RESET BE EF 03 06 00 MY IMAGE BE EF 03 06 00 AV
  • Hitachi CP X206 | Technical Manual - Page 22
    RS-232C communication/Network Command table (continued) Names Operation Type CLOSED CAPTION Set CHANNEL MY IMAGE Set MY IMAGE IMAGE1 Delete MY IMAGE IMAGE2 Delete MY IMAGE IMAGE3 Delete
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
±
Projector
CP-X206/CP-X306
User's Manual (detailed)
Technical
Resolution (H x V)
H. frequency (kHz)
V. frequency (Hz)
Rating
Signal mode
720 x 400
37.9
85.0
VESA
TEXT
640 x 480
3±.5
59.9
VESA
VGA (60Hz)
640 x 480
37.9
72.8
VESA
VGA (72Hz)
640 x 480
37.5
75.0
VESA
VGA (75Hz)
640 x 480
43.3
85.0
VESA
VGA (85Hz)
800 x 600
35.2
56.3
VESA
SVGA (56Hz)
800 x 600
37.9
60.3
VESA
SVGA (60Hz)
800 x 600
48.±
72.2
VESA
SVGA (72Hz)
800 x 600
46.9
75.0
VESA
SVGA (75Hz)
800 x 600
53.7
85.±
VESA
SVGA (85Hz)
832 x 624
49.7
74.5
Mac ±6” mode
±024 x 768
48.4
60.0
VESA
XGA (60Hz)
±024 x 768
56.5
70.±
VESA
XGA (70Hz)
±024 x 768
60.0
75.0
VESA
XGA (75Hz)
±024 x 768
68.7
85.0
VESA
XGA (85Hz)
±±52 x 864
67.5
75.0
VESA
±±52 x 864 (75Hz)
±280 x 960
60.0
60.0
VESA
±280 x 960 (60Hz)
±280 x ±024
64.0
60.0
VESA
SXGA (60Hz)
±280 x ±024
80.0
75.0
VESA
SXGA (75Hz)
±280 x ±024
9±.±
85.0
VESA
SXGA (85Hz)
±600 x ±200
75.0
60.0
VESA
UXGA (60Hz)
±280 x 768
47.7
60.0
VESA
W-XGA (60Hz)
±400 x ±050
65.2
60.0
VESA
SXGA+ (60Hz)
NOTE
• Be sure to check jack type, signal level, timing and resolution
before connecting this projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
• Depending on the input signal, full-size display may not be possible in some
cases. Refer to the number of display pixels above.
• Although the projector can display signals with resolution up to UXGA
(±600x±200), the signal will be converted to the projector’s panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and projector panel are identical.
• Automatically adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a
composite sync or a sync on G.
Example of PC signal