Hitachi CP X206 Technical Manual - Page 9
Communication Port, Command Control Settings
UPC - 050585151451
View all Hitachi CP X206 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Command Control via the Network Command Control via the Network Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Command Control Settings Configure the following items form a web browser when command control is used. Port Settings Netowrk Control Port1 (Port: 23) Port open Authentication Port open Network Control Port2 (Port: 9715) Authentication Click the [Enable] check box to open [Network Control Port1 (Port: 23)] to use TCP #23. Default setting is "Enable". Click the [Enable] check box for the [Authentication] setting when authentication is required. Default setting is "Disable". Click the [Enable] check box to open [Network Control Port2 (Port: 9715)] to use TCP #9715. Default setting is "Enable". Click the [Enable] check box for the [Authentication] setting when authentication is required. Default setting is "Enable". When the authentication setting is enabled, the following settings are required. Security Settings Network Control Authentication Password Re-enter Authentication Password Enter the desired authentication password. This setting will be the same for [Network Control Port1 (Port: 23)] and [Network Control Port2 (Port: 9715)]. Default setting is blank.