Hitachi CP-X250W User Manual - Page 25

EASY Menu

Page 25 highlights

Multifunctional settings EASY Menu With the EASY MENU, items shown in the table below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table. EASY MENU ASPECT 4:3 KEYSTONE +0 MODE BRIGHTNESS CONTRAST COLOR TINT SHARPNESS NORMAL +0 +0 +0 +0 3 WHISPER NORMAL MIRROR NORMAL RESET FILTER TIME 0h LANGUAGE ENGLISH Go To Advance Menu... Item ASPECT KEYSTONE Description Using the buttons ◄/► switches the mode for aspect ratio. See the ASPECT item in the IMAGE menu (30). Using the buttons ◄/► corrects the keystone distortion. See the item KEYSTONE of section SETUP menu. (21) Using the buttons ◄/► switches the mode of picture type. The modes of picture type are combinations of a mode of GAMMA and a mode of COLOR TEMP. Choose a suitable mode according to the projected source. NORMAL  CINEMA  DYNAMIC MODE BRIGHTNESS CONTRAST COLOR TINT SHRPNESS WHISPER NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT) CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT) DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT) • When the combination of GAMMA and COLOR TEMP differs from pre-assigned modes above, the display on the menu for the MODE is "CUSTOM". Please refer to the GAMMA (27) and COLOR TEMP (28) items in the PICTURE menu. • When this function is performed, a certain extra such as a line may appear. Using the buttons ◄/► adjusts the brightness. See the item BRIGHTNESS in the PICTURE menu (27). Using the buttons ◄/► adjusts the contrast. See the item CONTRAST of section PICTURE menu (27). Using the buttons ◄/► adjusts the strength of whole color. See the COLOR item in the PICTURE menu (28). Using the buttons ◄/► adjusts the tint. See the TINT item in the PICTURE menu (28). Using the buttons ◄/► adjusts the sharpness. See the SHARPNESS item in the PICTURE menu (28). • There may be some noise when an adjustment is made. This is not a malfunction. Using the buttons ◄/► turns off/on the whisper mode. See the WHISPER item in the SETUP menu (34). 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

25
Multifunctional settings
EASY Menu
Item
Description
ASPECT
Using the buttons ◄/► switches the mode for aspect ratio.
See the ASPECT item in the IMAGE menu
(
30
).
KEYSTONE
Using the buttons ◄/► corrects the keystone distortion.
See the item KEYSTONE of section SETUP menu.
(
21
)
MODE
Using the buttons ◄/► switches the mode of picture type. The
modes of picture type are combinations of a mode of GAMMA and
a mode of COLOR TEMP. Choose a suitable mode according to the
projected source.
NORMAL
CINEMA
DYNAMIC
NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)
CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)
DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)
• When the combination of GAMMA and COLOR TEMP differs from
pre-assigned modes above, the display on the menu for the MODE
is “CUSTOM”. Please refer to the GAMMA (
27
) and COLOR
TEMP (
28
) items in the PICTURE menu.
When this function is performed, a certain extra such as a line may appear.
BRIGHTNESS
Using the buttons ◄/► adjusts the brightness.
See the item BRIGHTNESS in the PICTURE menu
(
27
).
CONTRAST
Using the buttons ◄/► adjusts the contrast.
See the item CONTRAST of section PICTURE menu
(
27
).
COLOR
Using the buttons ◄/► adjusts the strength of whole color.
See the COLOR item in the PICTURE menu
(
28
).
TINT
Using the buttons ◄/► adjusts the tint.
See the TINT item in the PICTURE menu
(
28
).
SHRPNESS
Using the buttons ◄/► adjusts the sharpness.
See the SHARPNESS item in the PICTURE menu
(
28
).
• There may be some noise when an adjustment is made. This is
not a malfunction.
WHISPER
Using the buttons ◄/► turns off/on the whisper mode.
See the WHISPER item in the SETUP menu
(
34
).
With the EASY MENU, items shown in the table below can
be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control. Then perform it referring to the
following table.
S
N
SP
T
o To
dvance
enu
NOR
L
NOR
L
NOR
L
h
N LIS
STON
O
RI
TN SS
ONTR ST
OLOR
TINT
S
RPN SS
ISP R
IRROR
RST
ILT R TI
LN