Hitachi CP-X2511 Technical Manual - Page 8

Connection

Page 8 highlights

RS-232C Communication RS-232C Communication When the projector connects to the computer by RS-232C communication, the projector can be controlled with RS-232C commands from the computer. For details of RS-232C commands, refer to RS-232C Communication command table (&9). Connection 1. Turn off the projector and the computer. 2. Connect the projector's CONTROL port and the computer's RS-232C port with a RS-232C cable (cross). Use the cable that fulfills the specification shown in figure 3. Turn the computer on, and after the computer has started up turn the projector on. RS-232C CONTROL RS-2(3cr2oCssC) able RS-232C port of the computer CONTROL port of the projector    12345 6 78 9 CD (1) RD(2) TD (3) DTR (4) GND (5) DSR (6) RTS (7) DTS (8) RI (9) (1) ʵ (2) RD (3) TD (4) ʵ (5) GND (6) ʵ (7) RTS (8) CTS (9) ʵ 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

8
CD (1)
(1)
RD(2)
(2) RD
TD (3)
(3) TD
DTR (4)
(4)
GND (5)
(5) GND
DSR (6)
(6)
RTS (7)
(7) RTS
DTS (8)
(8) CTS
RI (9)
(9)
RS-232C Communication
RS-232C Communication
When the projector connects to the computer by RS-232C communication, the
projector can be controlled with RS-232C commands from the computer.
For details of RS-232C commands, refer to RS-232C Communication command
table (
&
9
).
Connection
1.
Turn off the projector and the computer.
2.
Connect the projector's
CONTROL
port and the computer's RS-232C port
with a RS-232C cable (cross). Use the cable that fulfills the specification
shown in figure
3.
Turn the computer on, and after the computer has started up turn the projector
on.
CONTROL
port
of the projector
RS-232C port
of the computer
9
5
4
3
2
1
6
7
8
CONTROL
RS-232C
RS-232C Cable
(cross)
1
2
4
3
8
9
5
7
6