Hitachi CP-X3010 User Manual - Page 11
For details of RS-232C commands, refer to RS-232C Communication / Network - specification
UPC - 050585151703
View all Hitachi CP-X3010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Command Control via the Network Command Control via the Network When the projector connects network, the projector can be controlled with RS232C commands from the computer with web browser. For details of RS-232C commands, refer to RS-232C Communication / Network command table (&17). Connection 1. Turn off the projector and the computer. 2. Connect the projector's LAN port and the computer's LAN port with a LAN cable. Use the cable that fulfills the specification shown in figure (Use CAT-5 or greater LAN Cable when LAN ports are used ) 3. Turn the computer on, and after the computer has started up turn the projector on. LAN cable (CAT-5 or greater) LAN LAN 11
11
Command Control via the Network
When the projector connects network, the projector can be controlled with RS-
232C commands from the computer with web browser.
For details of RS-232C commands, refer to RS-232C Communication / Network
command table
(
&
17
).
Connection
1.
Turn off the projector and the computer.
2.
Connect the projector's
LAN
port and the computer's LAN port with a LAN
cable. Use the cable that fulfills the specification shown in figure (Use CAT-5
or greater LAN Cable when LAN ports are used )
3.
Turn the computer on, and after the computer has started up turn the
projector on.
Command Control via the Network
LAN
LAN
LAN cable (CAT-5 or greater)