Hitachi CP-X605W User Manual - Page 56

Type number = DT00771, In case of replacement by yourself

Get Hitachi CP-X605W PDF manuals and user guides View all Hitachi CP-X605W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Maintenance Maintenance Lamp $ODPSKDV¿QLWHSURGXFWOLIH8VLQJWKHODPSIRUORQJSHULRGVRIWLPHFRXOGFDXVH the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, contact your dealer and tell the lamp type number. Type number = DT00771 Replacing the lamp The lamp cover 1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes. 2. Prepare a new lamp. If the projector is mounted on a ceiling, or if the lamp has broken, also ask the dealer to replace the lamp. In case of replacement by yourself, 3. Loosen the screw (marked by arrow) of the lamp cover and then slide the lamp cover to the side to remove it. 4. Loosen the 3 screws (marked by arrow) of the lamp, and slowly pick up the lamp by the handles. 5. ,QVHUWWKHQHZODPSDQGUHWLJKWHQ¿UPO\WKH 3 screws of the lamp that are loosened in the previous process to lock it in place. 6. 6OLGHWKHODPSFRYHUEDFNLQSODFHDQG¿UPO\ fasten the screw of the lamp cover. The handles 7. Turn the projector on and reset the lamp time using the LAMP TIME item in the OPTION menu ( 43). (1) Press the MENU button to display a menu. (2) Point at the "Go to Advanced Menu ..." in the menu XVLQJWKHźŸEXWWRQWKHQSUHVVWKHŹEXWWRQ (3) Point at the "OPTION" in the left column of the PHQXXVLQJWKHźŸEXWWRQWKHQSUHVVWKHŹ button.  3RLQWDWWKH³/$037,0(´XVLQJWKHźŸEXWWRQWKHQSUHVVWKHŹEXWWRQ$ dialog will appear.  3UHVVWKHŸEXWWRQWRVHOHFW³5(6(7´RQWKHGLDORJ,WSHUIRUPVUHVHWWLQJWKH lamp time. NOTE • Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp. 56

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
56
Maintenance
Lamp
the pictures darker or the color tone poor. Note that each lamp has a different
lifetime, and some may burst or burn out soon after you start using them.
Preparation of a new lamp and early replacement are recommended. To prepare
a new lamp, contact your dealer and tell the lamp type number.
Type number = DT00771
Replacing the lamp
1.
Turn the projector off, and unplug the power cord.
Allow the projector to cool for at least 45 minutes.
2.
Prepare a new lamp.
If the projector is mounted on a ceiling, or if the lamp
has broken, also ask the dealer to replace the lamp.
In case of replacement by yourself,
3.
Loosen the screw (marked by arrow) of the lamp cover
and then slide the lamp cover to the side to remove it.
4.
Loosen the 3 screws (marked by arrow) of the
lamp, and slowly pick up the lamp by the handles.
5.
3 screws of the lamp that are loosened in the
previous process to lock it in place.
6.
fasten the screw of the lamp cover.
7.
Turn the projector on and reset the lamp time
using the LAMP TIME item in the OPTION menu
(
43
)
.
(1) Press the MENU button to display a menu.
(2) Point at the “Go to Advanced Menu …” in the menu
(3) Point at the “OPTION” in the left column of the
button.
dialog will appear.
lamp time.
Maintenance
NOTE
• Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
The lamp cover
The handles