Hitachi CP-X880W User Manual - Page 50

OPERATING THE PC SCREEN You can use the remote control as a simplified mouse or keyboard. CAUTION Caution: Mistaken use of the mouse/keyboard control could damage your equipment. • Only connect to a PC. • Before connecting, read the manuals of the device you will connect. • Do not unplug the connector cables while the computer is operating. LASER INDICATOR STANDBY/ON VIDEO RGB FOCUS ZOOM UP PAGE DOWN BLANK LASER ASPECT PUSH ENTER ESC MENU RESET POSITION AUTO PinP MAGNIFY ON VOLUME OFF FREEZE MUTE WIRELESS KEYSTONE ONE TOUCH PS/2, ADB, Serial Mouse Control 1. Turn off the projector and PC power, and connect the projector's CONTROL terminal to the computer via the mouse cable. 2. If a USB cable is connected, disconnect it. If a USB cable is connected, the USB control function is given priority, and mouse control from the CONTROL terminal will not function. 3. Turn on the projector power, then the computer. The functions in the table below can be controlled. If you have difficulty with control, restart the computer (either from the software or by pressing the restart button). Available Functions Move Pointer Left click with mouse Remote Control Operation Move using on the disk pad Press the center of the disk pad Right click with mouse Press the right mouse button USB Mouse/Keyboard Control 1. Connect the projector's USB terminal to a PC using a USB cable. The functions in the table below can be controlled. Available Functions Remote Control Operation Move Pointer Move using on the disk pad Left click with mouse Right click with mouse Press the center of the disk pad Press the right mouse button Press the keyboard's keys Press Press the keyboard's ENTER key Press the ENTER button Press keyboard's PAGE UP key Press PAGE UP button Press keyboard's PAGE DOWN key Press PAGE DOWN button Press keyboard's ESC key Press ESC button NOTES • It may not be possible to control notebook PCs, and other computers with built-in pointing devices (e.g. track balls), using this remote control. In this case, before connecting go into BIOS (system setup) and select external mouse, and disable the pointing devices. In addition, the mouse may not function if the computer does not have the needed utility program. See your computer's hardware manual for details. • The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer's configurations and mouse drivers. • The USB control can only be used for the functions listed above. You cannot do things like press two buttons at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally). • This function is not available while the lamp is warming up (the POWER indicator flashes green), while adjusting the volume and display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen. 26