Hitachi CPX205 User Manual - Page 52

NETWORK menu NETWORK menu (continued) Item DEFAULT GATEWAY TIME DIFFERENCE DATE AND TIME e-SHOT Operation Use the buttons to enter the default gateway (a node on a computer network that serves as an access point to another network) address. This function can only be used when DHCP is set to OFF. Use the ▲/▼ buttons to enter the time difference. Set the same time difference as the one set on your PC. If unsure, consult your IT manager. Use the ◄ button to return to the menu after setting the TIME DIFFERENCE. Use the buttons to enter the Year (last two digits), Month, Date, Hour and Minute. • The projector will override this setting and retrieve the date and time information from the Time server when SNTP is enabled. ( "Date/Time Settings" section of the User's Manual - Network Guide) Use the ▲/▼ buttons to select an item and the ► or ENTER button to display the image. Image1 Image2 Image3 Image4 File names of registered images are displayed by 16 characters or less. Example: DEMONSTRATION-01 "NEW" stamp is added to the head of line when the image is registered newly. After the image is displayed, "NEW" stamp will be erased. Once an image is displayed, you can use the ▲/▼ buttons to page through the images. Use the ◄ or ESC button to return to the menu. Pressing the RESET button on the remote control while an image is being displayed will display the RESET menu. The displayed image can be deleted from the RESET menu using the ENTER button on the remote control or the INPUT button on the projector. If you do not wish to delete the image use the ESC button on the remote control or push the ◄ and INPUT buttons on the projector at the same time. • Items with no image stored cannot be selected. • Images can be changed using the ▲/▼ buttons while the image data downloads. 52