Hitachi DS18DLP4 Instruction Manual - Page 18
or physical damage can occur. It is recommended
![]() |
UPC - 717709011960
View all Hitachi DS18DLP4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
English 1.1 Using the hook The hook can be installed on the right or left side and the angle can be adjusted in 5 steps between 0° and 80°. (1) Operating the hook (a) Pull out the hook toward you in the direction of arrow (A) and turn in the direction of arrow (B). (Fig. 5) (b) The angle can be adjusted in 5 steps (0°, 20°, 40°, 60°, 80°). Adjust the angle of the hook to the desired position for use. (2) Switching the hook position CAUTION: ● If the tool falls, there is a risk that malfunction and/ or physical damage can occur. It is recommended that you also use fall-preventing wires, etc. ● Incomplete installation of the hook may result in bodily injury when used. 3 2 (B) 1 45 (A) Hook Fig. 5 Loosen Screw Fig. 6 (a) Securely hold the main unit and remove the screw using a slotted head screwdriver or a coin. (Fig. 6) (b) Remove the hook and spring. (Fig. 7) (c) Install the hook and spring on the other side and securely fasten with screw. (Fig. 6) NOTE: Pay attention to the spring orientation. Install the spring with larger diameter away from you. (Fig. 8) 1.2 Using as an auxiliary light (Light equipped hook) (1) Press the switch to turn off the light. If forgotten, the light will turn off automatically after 15 minutes. (Fig. 9) (2) The direction of the light can be adjusted within the range of hook positions 1 - 5. (Fig. 5) ⅜ Lighting time AAAA manganese batteries: approx. 15 hrs. AAAA alkali batteries: approx. 30 hrs. Hook Spring Fig. 7 Screw Larger diameter faces away Fig. 8 Switch CAUTION: ● Do not look directly into the light. Such actions could result in eye injury. Fig. 9 Hook 18
![](/manual_guide/products/hitachi-dv18dlp4-instruction-manual-fef4ab0/18.png)