Hitachi DV18DLP4 Instruction Manual - Page 14
Assembly And Operation
UPC - 717709011984
View all Hitachi DV18DLP4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
English ASSEMBLY AND OPERATION APPLICATIONS ⅜ Use as a hammer drill (for DV18DL) Drilling of soft bricks and concrete blocks. ⅜ Use as a drill (for DV18DL, DS18DL) Drilling of soft steel, wood, plastic and aluminum materials. ⅜ Use as a screwdriver (for DV18DL, DS18DL) Tightening and loosening of machine screws, wood screws and tapping screws. REMOVAL AND INSTALLATION METHOD OF BATTERY ⅜ How to install the battery Align the battery with the groove in tool handle and slip it into place. Always insert it all the way until it locks in place with a little click. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. (Fig. 3) ⅜ How to remove the battery Withdraw battery from the tool handle while pressing the latch (2 pcs.) on the sides of the battery. (Fig. 3) Insert Pull out Switch trigger Handle Latch Battery Push Fig. 3 CHARGING METHOD NOTE: Before plugging into the receptacle, make sure the following points. ⅜ The power source voltage is stated on the nameplate. ⅜ The cord is not damaged. WARNING: Do not charge at voltage higher than indicated on the nameplate. If charged at voltage higher than indicated on the nameplate, the charger will burn up. 14