Hitachi DZ-MV230A Owners Guide - Page 28
Attaching Lens Cap, Attaching Ferrite Cores
View all Hitachi DZ-MV230A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Attaching Lens Cap Pass the provided string through the hole in the lens cap and attach it to the hand strap of DVD video camera/recorder. 1 Use the string to attach the cap to the DVD video camera/recorder. 2 Push the both sides of cap inward and attach it over the lens. Note: Always keep the lens cap on when not using the DVD video camera/recorder, to protect the lens. Note: When recording, attach the lens cap to the hand strap by hooking the tab inside the cap onto strap for comfortable shooting. Attaching Ferrite Cores Although the cores are not attached in the illustrations of the cables in text, be sure to attach the ferrite core (provided) to the S-VIDEO cable using the following procedure (the ferrite core was attached to the AV input/output cable at the factory): (Ferrite cores reduce radio interference with your radio and TV.) 1 Open the cover of ferrite core. 2 Attach the core to the S-VIDEO cable at a posi- tion approximately 1-15/16" (5 cm) from its end. 3 Close the cover of core, taking care that it does not catch the S-VIDEO cable. Note: If you use an external microphone when recording, attach the ferrite core (provided) to the cable at a position approximately 1-15/16" (5 cm) from its end: Wind the microphone cable round the core once in the same way as for the S-VIDEO cable. Using external microphone in modes other than camera recording is not recommended. 1-15/16" (5cm) English 28