Hitachi L26D103 Owners Guide - Page 24

4 Press STOP to end playback. • The unit memorizes the stopped point, depending on the disc. " " appears on the screen. Press PLAY to resume playback (from the scene point). • If you press STOP again (" " appears on the screen) or unload the disc, the unit will clear the stopped point. 5 Press (EJECT). Remove the disc and then press POWER. The unit turns off. When you eject the disc, you may hear mechanism noise, but it is not malfunction. NOTE: • If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV screen according to the type of loaded disc. If these appear, check your disc again (see pages 9 and 30). • Some discs may take a minute or so to start playback. • If an 8 cm disc is placed into the disc slot and picture playback or menu display does not begin automatically, press PLAY. • A "Prohibition" symbol " " may appear at the upper right of the screen. This symbol means either the feature you tried is not available on the disc, or the unit cannot access the feature at this time. This does not indicate a problem with the unit. • If you place a single-faced disc label backwards (i.e. the wrong way) "Reading" will appear in the display and then "Incorrect Disc" will be displayed. • Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according to the disc content recorded, some playback features may not be available. Also refer to the instructions supplied with the DVDs. Special playback Fast Forward Playback Press SEARCH during normal playback. Each press of SEARCH will increase the speed of the search (x 2), (x 4), (x 8), (x 15). (CD: (x 2), (x 4), (x 8), (x 20)) • To resume normal playback, press PLAY. Review Playback Press SEARCH during normal playback. Each press of SEARCH will increase the speed of the search (x 2), (x 4), (x 8), (x 15). (CD: (x 2), (x 4), (x 8), (x 20)) • To resume normal playback, press PLAY. Still Playback Press PAUSE during normal playback to pause playback. • To resume normal playback, press PLAY. Frame Advance Press PAUSE during still playback. One frame is advanced each time you press PAUSE. • To resume normal playback, press PLAY. Slow-motion Playback Press SLOW Reverse or SLOW Forward during normal playback or still playback. Each press of SLOW will change the speed of the slow x1/2, x1/4, x1/6, x1/7. • To resume normal playback, press PLAY. • To resume the still playback, press PAUSE. Locating a chapter or track Press SKIP Forward or SKIP Reverse during playback to locate a chapter that you want to watch. Each time you press the button, a chapter or track is skipped. NOTE: • The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent damage to your television screen. • There may be a slight delay between when you press the button and the function activating. MP3/WMA/JPEG and Audio CD playback This player can play back MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW. To produce MP3/WMA/ JPEG-data, you need a Windows-PC with CD-ROM drive and MP3/WMA/JPEG-encoding software (not supplied). The Apple-HFS-System cannot be played. MP3/WMA/JPEG CD information Limitations on MP3/WMA/JPEG CD playback • MP3/WMA/JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digit extension letters, "mp3", "wma", "jpg". • The directory and file names of MP3/WMA/JPEG CD must correspond to ISO standardized files. • This unit can read 2000 files per disc. If one directory has more than 2000 files, it reads up to 2000 files, the remaining files will be omitted. • MP3/WMA CDs cannot be used for playback for the purpose of recording. • It may take more than one minute for this unit to read MP3/ WMA/JPEG files depending on its structure. • Music recorded by "Joliet Recording Specification" can be played back. • The music files recorded by "Hierarchical File System" (HFS) cannot be played. • The unit can play back baseline and progressive JPEG files. Limitations on display • The maximum number for display is 15 characters. Long file names will be condensed. • Available letters for display are the following: capital or lowercase letters A through Z, numbers 0 through 9, and _ (underscore). • Other letters than those above are replaced by a hyphen. Notes on MP3/WMA/JPEG files To play back MP3/WMA/JPEG CD in the recorded order, 1. Use MP3/WMA/JPEG software that records data alphabetically or numerically. 2. Name each file including a two-digit or three-digit number (e.g. "01" "02" or "001" "002"). 3. Refrain from making too many sub-folders. CAUTION: • Some MP3/WMA/JPEG CDs cannot be played back depending on the recording conditions. • The CD-R/RW that has no music data or non-MP3/WMA/JPEG files cannot be played back. MP3/WMA/JPEG CD and Audio CD playback: 1 Load a MP3/WMA/JPEG CD or an Audio CD in the disc slot. 2 "Reading" will appear on the TV screen. Reading time will depend on the number of files on the disc. 3 A file browser screen will appear on the TV screen. 24