Hitachi LE22S314 User Manual - Page 23

ENGLISH Connections to other equipments (continued) To connect the unit to a camcorder or game console To play back from a camcorder, connect the camcorder to the unit as shown. This unit can also be used as a display device for many video games. However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information. Left side of the unit To VIDEO/AUDIO IN To Video/Audio OUT Video/Audio cable (not supplied) or GAME CONSOLE To connect the unit to a PC (Personal Computer) Before you connect this TV to your PC, change the adjustment of your PC's Resolution and Refresh rate (60 Hz). Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cable to the audio output of your Multimedia computer and to the AUDIO connector of the PC/DVI AUDIO IN jack of the TV. You can also connect the PC with HDMI cable. If you use a HDMI cable, you don't have to connect the audio cable. If you use a DVI-to-HDMI cable, please connect the audio cable in the same way as the VGA cable. Press INPUT on the remote control to select PC mode. Switch on the computer. The TV can operate as the computer monitor. Rear of the unit To PC/DVI AUDIO IN Left side of the unit To PC MONITOR IN To HDMI IN HDMI cable (not supplied) VGA cable (not supplied) Audio cord (not supplied) Monitor Display modes MODE Resolution Refresh rate VGA 640x480 60/ 72/ 75 Hz VGA 720x400 70Hz SVGA 800x600 56/ 60/ 72/ 75 Hz XGA 1024x768 60/ 70/ 75 Hz WXGA 1280x768 60Hz WXGA 1280x720 60Hz WXGA 1360x768 60Hz SXGA 1280x1024 60Hz WXGA+ 1440x900 60Hz FHD 1920x1080 60Hz To return to normal mode Press INPUT SELECT again. NOTE: • The on-screen displays will have a different appearance in PC mode than in TV mode. • If there is no video signal from the PC when the unit is in PC mode, "No signal" will appear on the TV screen. 23