Hitachi NR83A2 Instruction Manual - Page 15
Adjusting The Nailing Depth, Warning - nr83a2s
UPC - 717709007277
View all Hitachi NR83A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ADJUSTING THE NAILING DEPTH [Only NR83A2 (with depth adjustment)] WARNING ⅷ Disconnect the air hose from the nailer before turning the adjuster. To assure that each nail penetrates to the same depth, be sure that: 1) the air pressure to the Nailer remains constant (regulator is installed and working properly), and 2) the Nailer is always held firmly against the workpiece. If nails are driven too deep or shallow into the workpiece, adjust the nailing in the following order. 1 DISCONNECT AIR HOSE FROM NAILER Adjuster 15 Disconnect air hose 2 If nails are driven too deep, turn the adjuster to the shallow side. Adjustments are in half-turn increments. 2 Turn Adjuster Too Deep Flush If nails are driven too shallow, turn the adjuster to the deep side. 2 Turn Adjuster Too Shallow Flush 3 Stop turning the adjuster when a suitable position is reached for a nailing test. 4 Connect the air hose. ALWAYS WEAR EYE PROTECTION. Perform a nailing test. 5 DISCONNECT AIR HOSE FROM NAILER. 6 Choose a suitable position for the adjuster. - 15 - English