Hitachi NR90GR Instruction Manual - Page 16
Loading Nails, Warning - nr90gc
UPC - 717709009417
View all Hitachi NR90GR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
English (5) Separate the push lever from the workpiece. Next, point the nailer downward, pull the trigger and then wait in that position for 5 seconds or longer. Ⅺ THE NAILER MUST NOT OPERATE. (3) Pull the nail feeder (B) back to engage the feeder knob to the nail strip. Pull trigger (6) Without touching the trigger, depress the push lever against the workpiece. Pull the trigger. Ⅺ THE NAILER MUST OPERATE. (7) If no abnormal operation is observed, you may load nails in the Nailer. Drive nails into the workpiece that is the same type to be used in the actual application. Ⅺ THE NAILER MUST OPERATE PROPERLY. LOADING NAILS WARNING ⅷ When loading nails into Nailer, 1) do not depress trigger; 2) do not depress push lever; and 3) keep Nailer pointed downward. 2-Action Nail Feeding! (1) Insert nail strip into the back of the magazine. Feeder knob Nail feeder (B) NOTE: ⅷ Quietly push the nail feeder (B) and feeder knob against the nail. If the nail feeder (B) and feeder knob are released from backward the magazine and bumped against the nail, the connecting paper or plastic of the nail can be damaged. ⅷ Use nail strip of more than 10 nails.(NR90GC) ⅷ Use an unbroken nail strip with nails of all the same length. (NR90GR) The Nailer is now ready to operate. Removing the nails: 1 Pull the feeder knob backward. 2 Return the feeder knob forward quietly while pushing the nail feeder (B). 3 Pull out nails from the back of the magazine. 1 2 Feeder knob Nail feeder (B) Magazine (2) Slide the nail strip forward in the magazine. Nails 3 - 16 -