Hitachi NT65GB Instruction Manual - Page 21
Working Environment, Cold Weather Care, Preparing The Fuel Cell
UPC - 717709012882
View all Hitachi NT65GB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
English WORKING ENVIRONMENT WARNING ⅷ No flammable gas, liquid or other flammable objects at worksite. ⅷ Use outside or well-ventilated areas. Do not inhale. ⅷ Keep the Nailer, 120°F MAX fuel cell and (50°C) battery away from sunshine and from temperature exceeding 120°F (50°C). ⅷ Keep away from ignition sources. No smoking. ⅷ Clear the area of children or unauthorized personnel. COLD WEATHER CARE ⅜ Do not store the Nailer, fuel cell and battery in a cold weather environment. Keep the Nailer, fuel cell and battery in a warm area until beginning the work. ⅜ If the Nailer, fuel cell and battery are already cold, bring it in a warm area and allow the Nailer to warm up before use. Observe temperature limit of max. 120°F (50°C). Do not expose to an open flame and sparks! CAUTION ⅷ This Nailer may not drive completely below when; at low temperature fuel cell loose the required propellant force, at high temperature fuel cell overdose. ⅷ Do not use the Nailer in the rain or where excessive moisture is present. ⅷ This Nailer is not recommended for use at altitudes above 5,000 feet (1,500 m), or in temperature below 30°F (0°C). PREPARING THE FUEL CELL Read section titled "SAFTY, IMPORTANT SAFETY INSTRUCTIONS FOR FUEL CELL" (page 9). DANGER ⅷ The fuel cell is flammable. ⅷ Keep away from ignition sources. ⅷ Do not spray to a naked flame or any incandescent material. ⅷ Do not smoke when handling fuel cell. ⅷ Keep stem of fuel cell away from face or skin. Expanding gases cause low temperatures. Do not contact with gases. ⅷ Do not inhale. ⅷ Keep out of reach of children. CAUTION ⅷ If the gas leaks from the metering valve or the gas cartridge after attached the metering valve, replace with the new metering valve. ⅷ Do not attempt to reuse the metering valve. Replace with the new metering valve. To attach the metering valve to a fuel cell: (1) Separate the metering valve and the cap from the gas cartridge. 21