Hitachi UT32V502W Owners Guide - Page 13

ENGLISH SAFETY PRECAUTIONS (continued) Floor Stand Setup 1 Remove the Stand Base from the Monitor Keep the screws. They will CAUTION be used for the Floor stand installation. Remove the 4 screws and raise straight up from tabletop stand. 2 Install the Monitor on the Floor Stand Monitor About the Installation This product is heavy and should be carried by at least 2 people. For Stand Assembly; please refer to the Installation Manual of the Floor Stand AS-LSZ0081 or AS-LSZ0082. 3 Attach the Monitor to the Floor Stand with the 4 screws used with the tabletop stand. CAUTION Adjust Monitor position left or right to match with screw holes. If the screw holes do not align, the Monitor may be damaged. WARNING Please make sure screws are tightened properly. Screws from the tabletop stand. CAUTION UT32V502 and UT32V502W LCD UT Monitors are only for use with the Hitachi AS-LSZ0081 and AS-LSZ0082 Floor stands respectively. Use with other floor stands could cause instability and possible injury. 12