Hitachi UT47V702 Owners Guide - Page 34

SETUP OPERATION (continued) Watching Images from HDMI/Composite Input 1. Connect to external equipment. (See 18 and 19 for details.) 2. Press the or Press the or button to switch to HDMI mode. button to switch to Composite mode. 3. Press the button. Setting Picture Adjustment You can adjust the display condition such as color settings. Select "Picture" from Menu list. Picture Picture Mode Contrast Brightness Color Sharpness Tint Color Temperature Back Light Reset Select OK Set Dynamic +31 -31 0 +15 0 Normal +20 Reset Return Picture Deep color Contrast Mode 3D Color Management Black Enhancement DNR MPEG NR Cross Color NR Game Mode Film Mode 3D Comb Filter Reset Select OK Set Dynamic Off Normal Off Off Off Off Off Off Off Off Reset Return Picture Color Temp. Adjust Select OK Set Dynamic Return Selected Items Picture Mode Contrast Brightness Color Sharpness Tint Color Temperature Back Light Reset 33 Setup hint Dynamic Natural Cinema -31~+31 (+32~+40) -31~+31 You can make the best selection from 3 modes depending on the lighting condition and intended use. Dynamic: Suitable for brighter conditions. Natural : Suitable for normal lighting conditions. Cinema : Suitable for watching movies. This adjusts the contrast to meet the surrounding brightness by using the ◄► button. T he maximum value is extended up to [+40] by pressing the button for more than 2 seconds at [+31]. The value between [+32] ~ [+40] appears in magenta. This is the special feature for dark images, so it is recommended to set the value less than [+31] under normal conditions. Adjust brightness according to personal preference by using the ◄► button. Adjust color according to personal preference by using the -31~+31 ◄► button. -15~+15 Preferred sharpness can be adjusted by pressing the button for softer image or the button for sharper image. -31~+31 Cool Normal Warm -20~+20 Pressing the button enhances red and weakens green, while pressing the button weakens red and enhances green. The setup hint is to adjust for realistic skin color. You can select from 3 settings depending on the color condition using the ◄► button. This function is not available when "Deep Color" is "On" in HDMI mode. Adjust the brightness of the Back Light for maximum visibility. Each item on this menu screen can be restored to the factory settings by pressing the OK button.