Hitachi UT47X902 Owners Guide - Page 12

SAFETY PRECAUTIONS (continued) Wall Mount Setup 1 Remove the Stand Base from the Monitor About the Installation This product is heavy and should be carried by at least 2 people. Please make sure screws are WARNING tightened properly. The torque should be 1.8~3.0 N.m (18~30 kgf.cm). Keep the screws. They may CAUTION be used for the Wall Mount installation. Remove the 4 screws and raise straight up from tabletop stand. 2 Install the Wall Mount Brackets on the Monitor using 4 screws (Screws Specification is shown below ). Screw Length (A) Screw Mounting Holes (4 places).Don't use the original flat head screws (A) that Insertion length (B) comes in the monitor, for the Wall Mount Braket. The length is not long enough. Spring Washer (C) Plane Washer (D) Wall Mount Bracket (E) Wall Mount Brackets For Wall Mount assembly; please refer to the Installation Manual of the Wall Mount Unit. If the Wall Mount Bracket thickness is 1~3 mm. the original screws removed from the stand base can be used for the Wall Mount installation. Example(37"/47") Example(42") : A = B+C+D+E A = B+C+D+E A: 11~13 mm. A: 12~16 mm. B: 7~9 mm. B: 8~12 mm. C: 1 mm. C: 1 mm. D: 1 mm. D: 1 mm. E: 2 mm. E: 2 mm. The screw type :Theread ISO M5 (Metric type, do not use Standard type). CAUTION Insertion length (B) of the screws must be within 7~9 mm(37"/47") or 8~12 mm(42"). If the 7 mm(37"/47") or 8 mm(42"), the weight can not be maintained. If the length is more than 9 length is less than mm(37"/47") or 12 mm(42"), a space is created between the Wall Mount Bracket and the Monitor. This length is very important. 3 Tips to consider for the location of the Monitor. Do not block the ventilation holes. In More than 30 cm (1'). addition please keep a cetain distance around and make sure not to obstruct ventilation. More than 10 cm (4"). Keep more than 2 cm (0.8") Blocking the ventilation holes might cause fire or defect. away from the wall. CAUTION If you purchased the Wall Mount unit, please ask for a professional installer. Do not install by yourself. This ultrathin unit features an advanced ventilation system configured for vertical installation. A knowledgeable and experienced professional technician can perform other mounting or installation orientations (e.g., horizontal, tilted) provided that you specifically inform the technician of the unit's specialized ventilation needs. Call 800-HITACHI for additional info and guidance. Although this LCD Monitor can be installed using a variety of third party wall mounting brackets/devices, such CAUTION third party brackets/devices have not been tested or approved by Hitachi for use or compatibility with this LCD Monitor. Accordingly, Hitachi accepts no responsability or liability for any injuries or property damage resulting from the use of such third party brackets/devices. Hitachi strongly advises that any installation of this LCD Monitor using wall mounting brackets/devices be performed only by a qualified and experienced television installation technician who has completed a thorough evaluation of: a) the weight-bearing strength and stability of the intended wall mount surface; and b) the weight-bearing strength and compatibility of the intended wall mount brackets/device. 11