Hitachi WH14DMR Instruction Manual - Page 6

and in this manual. REMEMBER: USE ONLY HITACHI BATTERY TYPES EB7 SERIES, EB9 SERIES, EB12 SERIES, EB14 SERIES. EB18 SERIES. OTHER TYPES OF BATTERIES MAY BURST AND CAUSE INJURY! Follow these instructions to avoid the risk of injury: WARNING: Improper use of the battery or battery charger can lead to serious injury. To avoid these injuries: 1. NEVER 2. NEVER 3. NEVER 4. NEVER 5. NEVER 6. NEVER 7. NEVER 8. NEVER 9. NEVER 10. NEVER 11. NEVER 12. ALWAYS 13. ALWAYS 14. ALWAYS disassemble the battery. incinerate the battery, even if it is damaged or is completely worn out. The battery can explode in a fire. short-circuit the battery. insert any objects into the battery charger's air vents. Electric shock or damage to the battery charger may result. charge outdoors. Keep the battery away from direct sunlight and use only where there is low humidity and good ventilation. charge when the temperature is below 32°F (0°C) or above 104°F (40°C). connect two battery chargers together. insert foreign objects into the hole for the battery or the battery charger. use a booster transformer when charging. use an engine generator or DC power to charge. store the battery or battery charger in places where the temperature may reach or exceed 104°F (40°C). operate charger on standard household electrical power (120 volts). Using the charger on any other voltage may overheat and damage the charger. wait at least 15 minutes between charges to avoid overheating the charger. disconnect the power cord from its receptacle when the charger is not in use. SAVE THESE INSTRUCTIONS FUNCTIONAL DESCRIPTION NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the power tool. NEVER operate, or attempt any maintenance on the tool unless you have first read and understood all safety instructions contained in this manual. Some illustrations in this Instruction Manual may show details or attachments that differ from those on your own power tool. SPECIFICATIONS 1. Cordless Impact Driver Model WH9DMR WH12DMR WH14DMR WH18DMR Voltage No-Load speed 9.6 V 12 V 14.4 V 0 - 2600 / min 18 V Capacity (Ordinary bolt) Tightening torque (Maximum) M5 - M12 930 in-lbs (105 N·m) 1,150 in-lbs (130 N·m) M6 - M14 1,240 in-lbs (140 N·m) 1,330 in-lbs (150 N·m) Weight 3.1 lbs. (1.4 kg) 3.5 lbs. (1.6 kg) 3.9 lbs. (1.8 kg) 4.4 lbs. (2.0 kg) 2. Cordless Impact Wrench Model WR9DMR WR12DMR WR14DMR WR18DMR Voltage 9.6 V 12 V 14.4 V 18 V No-Load speed 0 - 2600 / min Capacity (Ordinary bolt) M6 - M14 M10 - M16 Tightening torque (Maximum) 1,020 in-lbs (115 N·m) 1,420 in-lbs (160 N·m) 1,720 in-lbs (195 N·m) 1,950 in-lbs (220 N·m) Weight 3.1 lbs. (1.4 kg) 3.5 lbs. (1.6 kg) 3.9 lbs. (1.8 kg) 4.4 lbs. (2.0 kg) 3. Battery Charger Model Charging voltage 2.0 Ah Charging time 2.6 Ah Weight 3.0 Ah UC14YFA 7.2 - 14.4 V 50 min. 65 min. 70 min. 1.3 lbs. (0.6 kg) UC24YFA 7.2 - 24 V 50 min. 65 min. 70 min. 1.3 lbs. (0.6 kg) UC18YG 7.2 - 18 V 50 min. x x 0.7 lbs. (0.3 kg) All charge times are approximate. Actual charge time may vary. "x" Indicates that the battery pack is not compatible with that specific charger.