HoMedics AF-10 Downloadable Instruction Book - Page 4
Operating Instructions, Control Panel - true hepa air cleaner
View all HoMedics AF-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
NOTE: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature. To do so could result in an electric shock hazard. Control Panel Power ON/OFF Control Clean/Reset Filter Indicator Button CLEAN FILTER 1 2 3 Fan Speed Selection (Low/Medium/High) NOTE: The Clean/Reset Filter Indicator MUST be pressed to reset the indicator after you have cleaned and replaced the filter. 6 Operating Instructions Turning the Unit On • Take the air cleaner out of the box and remove the clear protective plastic bag. • Place the air cleaner on a firm level surface. • Before turning the air cleaner ON, you need to check that the True HEPA filter is firmly in place and did not become loose during shipping. You may also choose to install the optional odor reducing pre-filter. 1. To check the True HEPA filter, open the front grill by pulling on the tabs on either side of the top of the grill cover. Fig. 1 Fig. 1 2. Open the cover outward until the tabs at the bottom of the grill cover easily slide away from the unit. Fig. 2 Fig. 2 3. The True HEPA filter will be resting inside the unit. Make sure that the filter is firmly seated inside of the unit. Fig. 3 Fig. 3 7