HoMedics AF-100 Downloadable Instruction Book - Page 5

After cleaning or replacing the HEPA filter, be sure to reset - air cleaner

Page 5 highlights

4. Place the tabs at the bottom of the grill plate into the base of the unit. Push the grill plate back into place until you hear a click sound indicating that the grill is firmly latched. Fig. 4 Plug the power cord into a standard Fig. 4 AC outlet. NOTE: Unit will not operate unless filter and grill are properly installed. 1. On/Off and Fan Speed Settings • To turn the air cleaner on, press the ON/OFF Control. When the air cleaner is on, the ON/OFF Control will illuminate and the air cleaner will start to operate on LOW speed. • This air cleaner has 3 fan speed settings: LOW , MEDIUM , and HIGH . The higher the fan speed setting, the more air will be cleaned. To select or change fan speed, press the FAN SPEED Control until desired speed is reached. Return to LOW speed setting by cycling through MED and HIGH settings. Fan speed is indicated by the illuminated bars to the right of the fan speed control. • To turn the air cleaner off, press the ON/OFF Control. 2. Timer Select timed operation of your air cleaner with the TIMER Control. Timed operation up to 12 hours can be selected, in increments of 2 hours. The air cleaner will turn off automatically after the selected timer interval has elapsed. Use the timer setting whenever you wish to maintain air quality over a given time period (up to 12 hours), but do not wish to leave your air cleaner running continuously. To select timed operation, press the TIMER Control until desired timer setting is reached. Return to 2-hour timer setting by cycling through 12-hour setting. Timer interval selected is indicated by the illuminated time interval to the right of the timer control. To deselect timed operation, cycle through all timer settings until no timer interval is illuminated. 8 3. Using the Remote Control Battery Installation One CR2032 3V battery is included with the remote control. To activate the remote control, pull out the plastic pull tab protruding from the remote control housing. To change the battery, remove the battery door on the bottom of the remote by sliding the tab and pulling the door away from the back of the remote. Insert the battery into the remote with the + symbol facing up as shown on the drawer. NOTE: Always keep the battery and remote control out of the reach of children and pets. Bottom of Remote PULL BEFORE USE Control ON/OFF Speed Control Timer Control 4. Clean Filter Indicator Button This air cleaner is equipped with a CLEAN FILTER indicator button to let you know when the HEPA filter requires cleaning. Generally this is every 480 hours of use. When the HEPA filter requires cleaning, the CLEAN FILTER indicator button on the control panel will illuminate. If the air cleaner is used daily, we recommend cleaning the HEPA filter more frequently. Replacing HEPA Filter With regular cleaning the life of the HEPA filter is approximately 12-18 months under typical household usage and conditions. We recommend replacing your filter every year. To purchase replacement HEPA filters, model # AF-100FL, go back to your retailer (where you purchased your air cleaner), or visit www.homedics.com. After cleaning or replacing the HEPA filter, be sure to reset the filter indicator by pressing the CLEAN/RESET FILTER INDICATOR BUTTON for several seconds until an audible chime sounds and the light turns off. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

8
9
3. Using the Remote Control
Battery Installation
One CR2032 3V battery is included with the remote control. To activate the remote
control, pull out the plastic pull tab protruding from the remote control housing. To
change the battery, remove the battery door on the bottom of the remote by sliding
the tab and pulling the door away from the back of the remote. Insert the battery
into the remote with the
+
symbol facing up as shown on the drawer.
NOTE:
Always keep the battery and remote control out of the reach of children
and pets.
4. Clean Filter Indicator Button
This air cleaner is equipped with a CLEAN FILTER indicator button to let you know
when the HEPA filter requires cleaning. Generally this is every 480 hours of use.
When the HEPA filter requires cleaning, the CLEAN FILTER indicator button on the
control panel will illuminate.
If the air cleaner is used daily, we recommend cleaning the HEPA filter more
frequently.
Replacing HEPA Filter
With regular cleaning the life of the HEPA filter is approximately 12-18
months under typical household usage and conditions. We recommend
replacing your filter every year. To purchase replacement HEPA filters,
model # AF-100FL, go back to your retailer (where you purchased your air
cleaner), or visit www.homedics.com.
After cleaning or replacing the HEPA filter, be sure to reset the
filter indicator by pressing the CLEAN/RESET FILTER INDICATOR
BUTTON for several seconds until an audible chime sounds and the
light turns off.
Fig. 4
4. Place the tabs at the bottom of
the grill plate into the base of the
unit. Push the grill plate back into
place until you hear a click sound
indicating that the grill is firmly
latched. Fig. 4
Plug the power cord into a standard
AC outlet.
NOTE: Unit will not operate unless filter and grill are properly installed.
1. On/Off and Fan Speed Settings
• To turn the air cleaner on, press the ON/OFF
Control. When the air cleaner is
on, the ON/OFF Control will illuminate and the air cleaner will start to operate on
LOW speed.
• This air cleaner has 3 fan speed settings: LOW
, MEDIUM
, and HIGH
. The
higher the fan speed setting, the more air will be cleaned. To select or change fan
speed, press the FAN SPEED
Control until desired speed is reached. Return
to LOW speed setting by cycling through MED and HIGH settings. Fan speed is
indicated by the illuminated bars to the right of the fan speed control.
• To turn the air cleaner off, press the ON/OFF
Control.
2. Timer
Select timed operation of your air cleaner with the TIMER
Control. Timed
operation up to 12 hours can be selected, in increments of 2 hours. The air cleaner
will turn off automatically after the selected timer interval has elapsed. Use the timer
setting whenever you wish to maintain air quality over a given time period (up to 12
hours), but do not wish to leave your air cleaner running continuously.
To select timed operation, press the TIMER
Control until desired timer setting is
reached. Return to 2-hour timer setting by cycling through 12-hour setting. Timer
interval selected is indicated by the illuminated time interval to the right of the timer
control. To deselect timed operation, cycle through all timer settings until no timer
interval is illuminated.
Bottom of
Remote
Control ON/OFF
PULL
BEFORE
USE
Speed Control
Timer Control