HoMedics AP-T10 User Manual - Page 11
Troubleshooting
View all HoMedics AP-T10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
This product earned the ENERGY STAR label by meeting strict energy efficiency guidelines set by the U.S. EPA. Room air cleaners have demonstrated the potential for improving air quality and providing health benefits. EPA does not endorse manufacturer claims regarding the degree to which a specific product will produce healthier indoor air. The energy efficiency of this ENERGY STAR certified model is measured based on a ratio between the model's CADR for Smoke and the electrical energy it consumes, or CADR/Watt. TROUBLESHOOTING PROBLEM Unit will not operate POSSIBLE CAUSE • Unit is not plugged in • Power button not pressed • No power to unit SOLUTION • Plug unit in • Press the power button to turn the power on • Check circuits, fuses, try a different outlet Reduced airflow Reduced odor removal Excessive noise Power button flashes red after filter replacement • The grille may be blocked • Prefilter needs to be vacuumed • The HEPA-type filter needs to be replaced • Check to make sure nothing is blocking the grille and air outlet • Vacuum the prefilter with the brush attachment of your vacuum cleaner • Replace the HEPA-type filter • The HEPA-type filter needs to • Replace the HEPA-type filter be replaced • The unit is not level • Place the unit on a flat, level surface • The replace filter indicator needs to be reset • Press and hold the power button for 3 seconds until the flashing power light turns off 11