HoMedics BK-900 User Manual - Page 4

BackRejuvenator™ 8-motor Back Massager with Percussion Action Power Button To turn on the massage functions, press the POWER button. The L.E.D. indicator above it will illuminate and confirm your selection. To turn the massage functions off, simply press the button again and the L. E. D. indicator will turn off. Power Adapters Back Rejuvenator is powered by a custom 120 volt AC home adaptor, and 12 volt DC auto adaptor (cigarette lighter plug-in style). Both are included with your unit. NOTE: When selecting the heat feature with massaging action, there will be a slight decrease in the strength of the massage output. This adjustment is perfectly normal and should not be interpreted as a defect. Targeted Massage Buttons Zone buttons activate motors to massage specific areas: neck and shoulders, lower back, buttocks and thighs. Customize your massage by choosing one specific area, any combination of areas or all four. To select a massage area, simply push the button and the corresponding L. E. D. light will illuminate. To deselect, simply push the button again and the corresponding L. E. D. lights will turn off. 2 Percussion Action Heads Push either blue button to activate the dual pivoting heads for an invigorating massage to your upper back. Increase the massage speed by pushing the arrow button on the right. Decrease the speed by pushing the arrow button on the left. 6 H e a t Soothing, penetrating heat is activated by pushing the heat button. To turn heat off, simply push the button again. A glowing L. E. D. light indicates that heat is on. NOTE: The percussion action feature and the HEAT function are pressure activated. The massage/heat action will not function unless pressure is applied to the back of the cushion. Once pressure is removed, the percussion action massage or heat will stop. Massage Speed Choose the speed at which your custom programmed massage travels up and down Back Rejuvenator. With each press of the button, the cycle speed increases, creating three levels: low (L), medium (M), and high (H). Corresponding L. E. D. lights will indicate your selection. To decrease speed, simply press the button again. Massage Strength Choose the intensity of your massage. Back Rejuvenator gives you three options of massage strengths: low (L), medium (M), and high (H). L. E. D. lights correspond to your selection. To change the strength of your massage, simply press the button again. Massage Functions Back Rejuvenator incorporates 6 preprogrammed massage functions that can be easily selected by pressing the corresponding button. Once activated, you can move from one function to another by simply pressing another function key. All 6 programs allow you to choose the body zones activated, and the speed and intensity of your massage. All Motor Massage Activates all 8 vibration motors for a total massage experience Cycle Massage Massages from your neck down to your thighs and back up Tapping Massage Repeating bursts of massage relief Side-to-Side Massage From your left side to your right, back and forth Zig Zag Massage Massage pulses move in a stimulating "Z" pattern Random Massage Carries pulses in a random sequence 7