HoMedics BK-P200 User Manual - Page 4

10 Motor Back Massager Targeted Massage Buttons Zone buttons activate motors to massage specific areas: upper back, middle back, lower back and seat. Customize your massage by choosing one specific area, any combination of areas, or all four at once. To select a massage area, simply slide the button to the right and the corresponding L.E.D. light will illuminate. To deselect, simply slide the button to the far left and the corresponding L.E.D. lights will turn off. Power Adaptors This massager is powered by a custom 120 volt AC home adaptor, and 12 volt DC auto adaptor (cigarette lighter plug-in style). Both are included with your unit. NOTE: When selecting the heat feature with massaging action, there will be a slight decrease in the strength of the massage output. This adjustment is perfectly normal and should not be interpreted as a defect. 6 On/Off Before connecting power source, be sure the controls are in the far left position. Select L or H to activate the cushion and select a zone to begin the massage function. To choose the intensity of your massage, adjust the strength from L to H. Slide the power switch to customize the intensity. To turn the power off, slide the switch to the far left position and the LED will turn off. 10 Massage Motors Soothing Heat Heat Soothing, penetrating heat is activated by pressing this button. To turn off heat, simply press the button again. The glowing L.E.D. light indicates that heat is on. PLEASE NOTE: The heat option will only work while a massage feature is selected. 7 Pressure Activated Switch