HoMedics MCS-750H Downloadable Instruction Book - Page 5

NOTE: The moving massage mechanism always "parks" or finishes in its lowest position. It will continue to this position after the power has been turned off. If the electrical supply is interrupted, when power is restored, the mechanism will "park" or move to its lowest position. Demo Button For a brief demonstration of the features of the Massage Cushion, press the Demo button. The L.E.D. light will blink to indicate active function. The Demo can only be activated when the back mechanism is at the bottom position or Power Button is on. If the back mechanism does not start at the bottom, it will go to the bottom automatically. The unit will briefly go through each function. Once completed, the unit automatically turns off. Upper Upper can only be activated when either Knead, Rolling, or Tapping is on. Press "Upper" once, the LED light will illuminate, Kneading, Rolling, or Tapping the upper back. If "Upper" is already on, press it again, light will stay on the upper back area. Lower Lower can only be activated when Kneading, Rolling, or Tapping is on. Press Lower once, and LED light will illuminate, Kneading, Rolling or Tapping the lower back. If Lower is already on, pressing it again will keep massage on the lower back. Kneading Massage Kneading is a deep penetrating massage. "Knead" can only be activated when Power is on. Press "Knead" once, light on, rolling will be off, activate Knead; press it again, Knead off. Spot Massage Feature While the unit is in Kneading or Tapping, press spot button and either up or down and massager will stop in fixed position. Once the feature is operating, you may adjust the mechanism position by holding down either button until the desired position is reached. The Up arrow will move the mechanism upwards, the Down arrow will move it downward. Once the button is released, the mechanism will stop in that place. Spot position will move from its current position when Upper, Lower, or Perfect Fit is pressed. Press Rolling to turn off the spot and start rolling or Perfect Fit by default. Rolling Massage Rolling is like two hands working slowly up and down your back. "Rolling" can only be activated when Power is on. Press "Rolling" once and LED light will illuminate; Kneading and Tapping will be off. press it again, Rolling will turn off. 8 Quad Shiatsu Massage Cushion Power Button To turn on the Massage functions, first press the POWER button. The L.E.D indicator will illuminate and confirm you selection. Knead and Perfect Fit will turn on by default, kneading the full back. To turn off the massage functions, simply press the button again. The L.E.D indicator will blink while the massage mechanism returns to its lowest point and then turn off. with heat Perfect Fit™ Perfect Fit™ technology allows you to set the massage range to the height that is perfect for your back. Perfect Fit can only be activated when Power is on. Press Perfect Fit once, LED light will illuminate, and full back massage will turn on. Press twice, the LED light will flash, and the mechanism's current position is considered the highest distance, mechanism will travel within the designated height and the bottom. Press button a third time, and massage function will return back to full back massage. If the designated height is shorter than 1/3 of the travel distance, it will take 1/3 of the travel distance as the highest height. Tapping Tapping is a fast, invigorating massage. Tapping can only be activated when Power is on. Press "Tapping" once, light on, Rolling will be off, activate high & Tapping; press it twice, activate low & Tapping; press it third time, Tapping off. Width Adjustment Feature Width can only be activated when Rolling or Tapping is on. Press the button to adjust the massage nodes width. With each press, the massage heads will move to the next available position. Heat Button For soothing heat, when either Kneading, Rolling or Tapping massage is on, simply press the heat button and the corresponding red L.E.D light will illuminate. To deselect, press the button again and the corresponding L.E.D. light will turn off. Fig. 1 NOTE: There is a 15-minute auto shut off on the unit of your safety. 9