HoMedics QRM-400H Downloadable Instruction Book - Page 5

Quad-Roller, Massaging Cushion - power supply

Page 5 highlights

Quad-Roller Massaging Cushion Moving Quad-Roller Massage Mechanism Power Button To turn on the massage functions, first press the POWER button. The L.E.D. indicator will illuminate and confirm your selection. To turn off the massage functions, simply press the button again. The L.E.D. indicator will blink while the massage mechanism returns to its lowest point and then it will turn off. NOTE: The moving massage mechanism always "parks" or finishes in its lowest position. It will continue to this position after the power has been turned off. If the electrical supply is interrupted, when power is restored, the mechanism will "park" or move to its lowest position. Shiatsu Massage Shiatsu is a deep kneading massage. Shiatsu Programs Choose from 3 preset programs where the Shiatsu massage travels up and down in a specific area of the back. To select a program, simply press the button and the L.E.D. will illuminate. To deselect, press the button again or press another button. Spot Shiatsu While the unit is in Shiatsu massage, press either button to stop and focus the Shiatsu action in one place. Once the unit is operating in Spot Shiatsu, you may adjust the mechanism position by holding down either button until the desired position is reached. The Up Arrow will move the mechanism upwards and the Down Arrow will move it down. Once you release the button, the mechanism will stop in that place. 8 Demo Button For a brief demonstration of the features of the Quad-Roller Massaging Cushion, press the Demo button. The unit will briefly go through each function. Once completed, the unit automatically turns off. The L.E.D. light will blink to indicate active function. Rolling Massage Rolling is like two hands working slowly up and down your back. Width Adjustment While the unit is in Rolling massage, press this button to adjust the distance or width between the massage heads. With each press, the massage heads will move to the next available position. Rolling Programs Choose from 3 preset programs where the Rolling massage travels up and down in a specific area of the back. To select a program, simply press the button and the L.E.D. will illuminate. To deselect, press the button again or press another button. Heat Button For soothing heat, when massage is on, simply press the heat button and the corresponding red L.E.D. light will illuminate. To deselect, press the button again and the corresponding L.E.D. light will turn off. For your safety, heat cannot be turned on if no massage program is selected. Moving Quad-Roller massage mechanism With L.E.D. illumination (blue when massage only is on, red when heat is turned on) NOTE: There is a 15-minute auto shut off on the unit for your safety. 9 The actual product materials and fabrics may vary from the picture shown.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

NOTE: The moving
massage mechanism
always “parks”
or finishes in its
lowest position. It
will continue to this
position after the
power has been
turned off. If the
electrical supply is
interrupted, when
power is restored,
the mechanism will
“park” or move to
its lowest position.
Demo Button
For a brief demonstration of the features of the Quad-Roller
Massaging Cushion, press the Demo button. The unit will
briefly go through each function. Once completed, the unit
automatically turns off. The L.E.D. light will blink to indicate
active function.
Rolling Massage
Rolling is like two hands working slowly up and down
your back.
Width Adjustment
While the unit is in Rolling massage, press this button to
adjust the distance or width between the massage heads.
With each press, the massage heads will move to the next
available position.
Rolling Programs
Choose from 3 preset programs where the Rolling massage
travels up and down in a specific area of the back. To select
a program, simply press the button and the L.E.D. will
illuminate.
To deselect, press the button again or press
another button.
Heat Button
For soothing heat, when massage is on, simply press the
heat button and the corresponding red L.E.D. light will
illuminate. To deselect, press the button again and the
corresponding L.E.D. light will turn off. For your safety, heat
cannot be turned on if no massage program is selected.
NOTE:
There is a 15-minute auto shut off
on the unit for your safety.
Power Button
To turn on the massage
functions, first press
the POWER button. The
L.E.D. indicator will
illuminate and confirm your
selection. To turn off the
massage functions, simply
press the button again.
The L.E.D. indicator will
blink while the massage
mechanism returns to its
lowest point and then it will
turn off.
Shiatsu Massage
Shiatsu is a deep
kneading massage.
Shiatsu Programs
Choose from 3 preset
programs where the Shiatsu
massage travels up and down
in a specific area of the back.
To select a program, simply
press the button and the L.E.D.
will illuminate.
To deselect,
press the button again or press
another button.
Spot Shiatsu
While the unit is in Shiatsu
massage, press either button
to stop and focus the Shiatsu
action in one place.
Once
the unit is operating in Spot
Shiatsu, you may adjust the
mechanism position by holding
down either button until the
desired position is reached.
The Up Arrow will move the
mechanism upwards and the
Down Arrow will move it down.
Once you release the button,
the mechanism will stop in
that place.
Moving Quad-Roller
massage mechanism
With L.E.D. illumination
(blue when massage only
is on, red when heat is
turned on)
8
9
Quad-Roller
Massaging Cushion
Moving Quad-Roller Massage Mechanism
The actual product materials and fabrics may
vary from the picture shown.