Holmes HAP716-NU-1 Instruction Manual - Page 2

Important Safeguards, Save Safety, Instructions

Page 2 highlights

IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons. These precautions include: 1. Read all instructions before using the appliance. 2. To reduce the risk of fire or electric shock, plug the appliance directly into a 120V AC electrical outlet. 3. If the Filter is covered by a bag when shipped, remove plastic bag before use. 4. Keep the cord out of heavy traffic areas. To avoid fire hazard, NEVER put the cord under rugs, near heat registers, radiators, stoves, or heaters. 5. DO NOT immerse the appliance in water or other liquids. Do not use near water. 6. Close supervision is necessary when any appliance is used by or near children, or disabled persons. 7. Always unplug the air purifier before moving or cleaning the unit, opening the grill, changing the filter and whenever the unit is not in use. To disconnect the unit, be sure to pull the plug and not the cord. 8. NEVER drop or insert any objects into the openings of the unit. 9. DO NOT operate any appliance with a damaged cord or plug. If the motor fan fails to operate or the unit has been dropped or damaged in any manner, return appliance to manufacturer for examination and/or repair. 10. Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by Jarden Consumer Solutions may cause injuries. 11. DO NOT use outdoors. 12. NEVER place on a soft surface such as a bed or sofa as this could cause the unit to tip over and block the air inlet or outlet grills. 13. Keep unit away from heated surfaces and open flames. 14. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so may cause injuries and void your warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by Jarden Consumer Solutions or an authorized Jarden Consumer Solutions Center. 15. DO NOT place anything on top of unit. 16. Always turn the appliance off before unplugging it. 17. The ionizer may cause a static charge to build up on the air outlet grill. A static charge may be felt if the unit is not properly grounded. To avoid a static charge, plug the unit's three-prong plug into a grounded outlet, or properly install a ground adaptor (see PLUG SAFETY). The static charge will not occur if the ionizer is off. 18. The ionizer in this appliance produces less ozone than the UL established limits of 50ppb. However, in high concentrations, ozone can be harmful to birds and small pets. To prevent ozone buildup, we suggest using the ionizer in well ventilated areas with the fan on. 19. This appliance should only be used in a room with temperatures between 40° F and 110° F. 20. WARNING: To reduce the risk of fire or electric shock, DO NOT use this appliance with any solid-state speed control device. SAVE SAFETY INSTRUCTIONS GROUNDED PLUG CAUTION: To reduce the risk of electric shock, THIS PRODUCT IS EQUIPPED WITH A 3-PRONG PLUG, a grounding type plug that has a third (grounding) pin. The cord has a plug (A) as shown. An adapter (C) can be purchased for connecting three-blade grounding-type plugs to two-slot receptacles (B). The green grounding wire or lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available. This plug will only fit into a grounding type power outlet. If the plug does not fit into the outlet, contact qualified electrician to install the proper outlet. FEATURES This product is for use on 120 volts. DO NOT ALTER THE PLUG IN ANY WAY. POWER CORD INSTRUCTIONS • The length of cord used on this appliance was selected to reduce tangling or tripping hazards. • If a longer cord is necessary, an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the electrical rating of the air purifier (see rating label marked on product). • Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over. GET TO KNOW YOUR AIR PURIFIER Your true HEPA air cleaner removes up to 99.97% of airborne allergens as small as 0.3 microns, including ragweed pollen, grass pollen, tree pollen, household dust, dust mite debris, mold spores, pet dander and smoke from the air passing through the filter. IONIZER This appliance has an optional ionizer feature which, when turned on, releases negative ions into outgoing filtered air to help the air purification process. What Are Ions? Ions are tiny particles that carry a positive or negative charge. They exist naturally around us: in the air, water, and ground. Both positive and negative ions are colorless, odorless, and harmless. How Does The Ionizer Work? Negative ions help air purification by attaching themselves to very small airborne particles in the room. These particles take on a negative charge and may join with positively charged particles such as dust, pollen, smoke, and pet dander to form larger particles. These larger particles are then more easily captured by the filter system. Important Notes: Your ionizer may produce an occasional popping or cracking sound. This is normal and occurs when a small buildup of ions is discharged. After extended use, you may notice dust around the grills or front panel. This is caused by negative ions exiting the air outlet, evidence of the ionizer's air cleaning effectiveness. You can remove the dust with a soft brush or clean, damp cloth. Larger particles may be attracted to positively charged surfaces throughout the home, like walls or floors. • This may occur more frequently when the filter is nearing the end of its usable product life and unable to capture as many charged particles. • Excessive amounts of pet dander, dust, or smoke may decrease the life expectancy of the filter and interfere with the ionization process. To help prevent particles from attracting to surfaces throughout your home: • You may want to run the ionizer less often. • Check the condition of the filter more frequently. CAUTION: The ionizer in this appliance produces less ozone than the UL* established limits of 50ppb. However, in high concentrations, ozone can be harmful to birds and small pets. To prevent ozone buildup, we suggest using the ionizer in well ventilated areas with the fan on. *Tested and listed by the underwriters laboratories, inc. FEATURES - OPERATIONS TRUE HEPA FILTER HEPA (High Efficiency Particulate Air) filters are designed to remove up to 99.97% of airborne pollutants at 0.3 microns or larger, from the air that passes through them. These include tobacco smoke, household dust, pet dander and pollen. HIGH, MEDIUM AND LOW SPEED SETTINGS For optimum air filtration, operate your Holmes® air purifier continuously on the MEDIUM ( 2 ) setting. Its rugged motor has been designed to give many years of use. For quieter operation (such as in a bedroom), select the LOW ( 1 ) setting. When high levels of air pollution are present, select the HIGH ( 3 ) setting to quickly circulate and filter the room air. CLEANING/MAINTENANCE INSTRUCTIONS 1. Turn the air purifier off and unplug it before cleaning. 2. The outside of the air purifier can be cleaned with a soft, clean dampened cloth. 3. The rear air inlet grill can be removed and washed in warm soapy water (not dishwasher safe). Dry before replacing in the unit. 4. The filtered air outlet can be cleaned of dust with a small, soft brush. Fig. 1 B A BEFORE USE 1. Carefully unpack your Air Purifier. 2. Select a firm level place with no obstructions to the air inlet or filtered air outlet. 3. If the filter is covered by a bag when shipped, remove plastic bag before use and place filters into unit. DO NOT POINT FILTERED AIR OUTLET TOWARDS WALL. OPERATING INSTRUCTIONS 1. Plug into a 120V AC electrical outlet. 2. Select the desired operating speed from HIGH ( 3 ), MEDIUM ( 2 ) or LOW ( 1 ), by moving the switch to the desired setting. 3. To release negative ions into the filtered air, move the ionizer switch to ON( ) and the light will illuminate. For optimum air filtration, it is recommended to operate the air purifier continuously. Its rugged motor has been designed to give many years of use. D A. AIR INLET GRILL B. WASHABLE FOAM PRE-FILTER C. TRUE HEPA FILTER (2 PCS) D. FILTERED AIR OUTLET E. FILTER INDICATOR LIGHT F. RESET HOLE G. IONIZER LIGHT H. IONIZER CONTROL I. SPEED CONTROL J. POWER LIGHT C E FG H I J Top of The Unit CLEANING/MAINTENANCE FILTER REPLACEMENT 5. If you wish to clean the inside of the air purifier, please only use a dry, soft cloth to wipe it down. WARNING: Do not allow moisture to come in contact with internal components. FILTER REPLACEMENT INSTRUCTIONS IMPORTANT: • DO NOT attempt to wash and re-use HEPA filters. • If new filters are enclosed in plastic bags, remove them before use. NOTE: Every few weeks, check the condition of filters. Filter life will vary, depending on air quality and usage. Under normal conditions of continuous use, HEPA filters need replacement every 10-12 months. To replace your filter: 1. Turn off and unplug the air purifier. 2. Open the air inlet grill and examine the foam prefilter. Remove any dust or lint, and wash in warm soapy water. Rinse, drip dry, and place back into grill inlet. 3. Remove used filters from the unit by pulling them gently towards you and discard them. DO NOT attempt to clean the old HEPA filters. 4. Install the new HEPA-type filter into the unit. 5. Align the clip on the side of HEPA filter with rails on the Fig. 2 inside of the purifier unit. Gently slide the filter onto the rail. (Fig. 2) 6. Replace air inlet grill. 7. This model requires user to reset the Filter Life Monitor once filters have been replaced. Reset the monitor by inserting a small object (such as a pin or paperclip) into the hole marked RESET ( ) and holding it down for 2-3 seconds. Filters can be purchased at a retailer near you, online at www.holmesproducts.com. Air Purifier Model Number HAP716 Filter Quantity Needed 2 Compatible with all filter models below HAPF30AT HAPF30AO HAPF30AS HAPF300AH HAPF300AP (D filter) HAPF30 (A filter) Filter Description Aer1® Total Air Filter Aer1® Odor Filter Aer1® Smoke Grabber® Filter Aer1® Allergen Remover Filter Aer1® Allergen Performance PlusTM "D" Filter Holmes® "A" Filter HAP716_17EM1.indd 2 1/12/17 9:25 AM

  • 1
  • 2

IMPORTANT SAFEGUARDS
FEATURES
TRUE HEPA FILTER
HEPA (High Efficiency Particulate Air) filters are designed
to remove up to 99.97% of airborne pollutants at 0.3
microns or larger, from the air that passes through them.
These include tobacco smoke, household dust, pet dander
and pollen.
HIGH, MEDIUM AND LOW SPEED
SETTINGS
For optimum air filtration, operate your Holmes
®
air
purifier continuously on the MEDIUM ( 2 ) setting. Its
rugged motor has been designed to give many years of
use. For quieter operation (such as in a bedroom), select
the LOW ( 1 ) setting. When high levels of air pollution
are present, select the HIGH ( 3 ) setting to quickly
circulate and filter the room air.
BEFORE USE
1.
Carefully unpack your Air Purifier.
2.
Select a firm level place with no obstructions to the air
inlet or filtered air outlet.
3.
If the filter is covered by a bag when shipped, remove
plastic bag before use and place filters into unit.
DO NOT POINT FILTERED AIR OUTLET TOWARDS WALL.
OPERATING INSTRUCTIONS
1. Plug into a 120V AC electrical outlet.
2. Select the desired operating speed from HIGH ( 3 ),
MEDIUM ( 2 ) or LOW ( 1 ), by moving the switch to
the desired setting.
3. To release negative ions into the filtered air, move
the ionizer switch to ON(
) and the light will
illuminate.
For optimum air filtration, it is recommended to operate
the air purifier continuously. Its rugged motor has been
designed to give many years of use.
CLEANING/MAINTENANCE INSTRUCTIONS
1.
Turn the air purifier off and unplug it before cleaning.
2. The outside of the air purifier can be cleaned with a
soft, clean dampened cloth.
3. The rear air inlet grill can be removed and washed in
warm soapy water (not dishwasher safe). Dry before
replacing in the unit.
4. The filtered air outlet can be cleaned of dust with a
small, soft brush.
This product is for use on 120 volts.
DO NOT ALTER THE
PLUG IN ANY WAY.
POWER CORD INSTRUCTIONS
The length of cord used on this appliance was
selected to reduce tangling or tripping hazards.
If a longer cord is necessary, an approved extension
cord may be used. The electrical rating of the
extension cord must be equal to or greater than the
electrical rating of the air purifier (see rating label
marked on product).
Care must be taken to arrange the extension cord so
that it will not drape over the countertop or tabletop
where it can be pulled on by children or accidentally
tripped over.
GET TO KNOW YOUR AIR PURIFIER
Your true HEPA air cleaner removes up to 99.97% of
airborne allergens as small as 0.3 microns, including
ragweed pollen, grass pollen, tree pollen, household dust,
dust mite debris, mold spores, pet dander and smoke
from the air passing through the filter.
IONIZER
This appliance has an optional ionizer feature which,
when turned on, releases negative ions into outgoing
filtered air to help the air purification process.
What Are Ions?
Ions are tiny particles that carry a positive or negative
charge. They exist naturally around us: in the air, water,
and ground. Both positive and negative ions are colorless,
odorless, and harmless.
How Does The Ionizer Work?
Negative ions help air purification by attaching
themselves to very small airborne particles in the room.
These particles take on a negative charge and may join
with positively charged particles such as dust, pollen,
smoke, and pet dander to form larger particles. These
larger particles are then more easily captured by the
filter system.
Important Notes:
Your ionizer may produce an occasional popping or
cracking sound. This is normal and occurs when a small
buildup of ions is discharged.
After extended use, you may notice dust around the grills
or front panel. This is caused by negative ions exiting the
air outlet, evidence of the ionizer’s air cleaning
effectiveness. You can remove the dust with a soft brush
or clean, damp cloth.
Larger particles may be attracted to positively charged
surfaces throughout the home, like walls or floors.
This may occur more frequently when the filter is
nearing the end of its usable product life and unable
to capture as many charged particles.
Excessive amounts of pet dander, dust, or smoke may
decrease the life expectancy of the filter and
interfere with the ionization process.
To help prevent particles from attracting to surfaces
throughout your home:
You may want to run the ionizer less often.
Check the condition of the filter more frequently.
CAUTION:
The ionizer in this appliance produces less
ozone than the UL* established limits of 50ppb. However,
in high concentrations, ozone can be harmful to birds and
small pets. To prevent ozone buildup, we suggest using
the ionizer in well ventilated areas with the fan on.
*Tested and listed by the underwriters laboratories, inc.
When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock, and injury to persons. These precautions include:
1. Read all instructions before using the appliance.
2. To reduce the risk of fire or electric shock, plug the
appliance directly into a 120V AC electrical outlet.
3. If the Filter is covered by a bag when shipped,
remove plastic bag before use.
4. Keep the cord out of heavy traffic areas. To avoid
fire hazard, NEVER put the cord under rugs, near
heat registers, radiators, stoves, or heaters.
5. DO NOT immerse the appliance in water or other
liquids. Do not use near water.
6. Close supervision is necessary when any appliance is
used by or near children, or disabled persons.
7. Always unplug the air purifier before moving or
cleaning the unit, opening the grill, changing the
filter and whenever the unit is not in use. To
disconnect the unit, be sure to pull the plug and not
the cord.
8. NEVER drop or insert any objects into the openings of
the unit.
9. DO NOT operate any appliance with a damaged cord
or plug. If the motor fan fails to operate or the unit
has been dropped or damaged in any manner, return
appliance to manufacturer for examination and/or
repair.
10. Use appliance only for intended household use as
described in this manual. Any other use not
recommended by the manufacturer may cause fire,
electric shock, or injury to persons. The use of
attachments not recommended or sold by Jarden
Consumer Solutions may cause injuries.
11. DO NOT use outdoors.
12. NEVER place on a soft surface such as a bed or sofa
as this could cause the unit to tip over and block the
air inlet or outlet grills.
13.
Keep unit away from heated surfaces and open flames.
14. DO NOT attempt to repair or adjust any electrical or
mechanical functions on this unit. Doing so may
cause injuries and void your warranty. The inside of
the unit contains no user serviceable parts. All
servicing should be performed by Jarden Consumer
Solutions or an authorized Jarden Consumer
Solutions Center.
15. DO NOT place anything on top of unit.
16. Always turn the appliance off before unplugging it.
17. The ionizer may cause a static charge to build up on
the air outlet grill. A static charge may be felt if the
unit is not properly grounded. To avoid a static
charge, plug the unit's three-prong plug into a
grounded outlet, or properly install a ground adaptor
(see PLUG SAFETY). The static charge will not occur if
the ionizer is off.
18.
The ionizer in this appliance produces less ozone than
the UL established limits of 50ppb. However, in high
concentrations, ozone can be harmful to birds and
small pets. To prevent ozone buildup, we suggest using
the ionizer in well ventilated areas with the fan on.
19. This appliance should only be used in a room with
temperatures between 40° F and 110° F.
20.
WARNING:
To reduce the risk of fire or electric
shock, DO NOT use this appliance with any solid-state
speed control device.
SAVE SAFETY
INSTRUCTIONS
GROUNDED PLUG
CAUTION:
To reduce the risk of electric shock, THIS
PRODUCT IS EQUIPPED WITH A 3-PRONG PLUG, a
grounding type plug that has a third (grounding) pin.
The cord has a plug (A) as shown. An adapter (C) can be
purchased for connecting three-blade grounding-type
plugs to two-slot receptacles (B).
The green grounding wire or lug extending from the adapter
must be connected to a permanent ground such as a
properly grounded outlet box. The adapter should not be
used if a three-slot grounded receptacle is available.
This plug will only fit into a grounding type power outlet. If
the plug does not fit into the outlet, contact qualified
electrician to install the proper outlet.
FEATURES - OPERATIONS
CLEANING/MAINTENANCE
FILTER REPLACEMENT
5.
If you wish to clean the inside of the air purifier,
please only use a dry, soft cloth to wipe it down.
WARNING:
Do not allow moisture to come in contact
with internal components.
FILTER REPLACEMENT INSTRUCTIONS
IMPORTANT:
DO NOT attempt to wash and re-use HEPA filters.
If new filters are enclosed in plastic bags, remove them
before use.
NOTE:
Every few weeks, check the condition of filters.
Filter life will vary, depending on air quality and usage.
Under normal conditions of continuous use, HEPA filters
need replacement every 10-12 months.
To replace your filter:
1. Turn off and unplug the air purifier.
2. Open the air inlet grill and examine the foam prefilter.
Remove any dust or lint, and wash in warm soapy
water. Rinse, drip dry, and place back into grill inlet.
3. Remove used filters from the unit by pulling them
gently towards you and discard them. DO NOT attempt
to clean the old HEPA filters.
4. Install the new HEPA-type filter into the unit.
5. Align the clip on the side of
HEPA filter with rails on the
inside of the purifier unit.
Gently slide the filter onto the
rail. (Fig. 2)
6. Replace air inlet grill.
7. This model requires user to
reset the Filter Life Monitor once filters have been
replaced. Reset the monitor by inserting a small object
(such as a pin or paperclip) into the hole marked
RESET (
) and holding it down for 2-3 seconds.
Filters can be purchased at a retailer near you, online at www.holmesproducts.com.
Air Purifier
Model Number
Filter Quantity
Needed
Compatible with all filter
models below
Filter
Description
HAP716
2
HAPF30AT
HAPF30AO
HAPF30AS
HAPF300AH
HAPF300AP (D filter)
HAPF30 (A filter)
Aer1
®
Total Air Filter
Aer1
®
Odor Filter
Aer1
®
Smoke Grabber
®
Filter
Aer1
®
Allergen Remover Filter
Aer1
®
Allergen Performance Plus
TM
"D" Filter
Holmes
®
"A" Filter
A. AIR INLET GRILL
B. WASHABLE FOAM
PRE-FILTER
C. TRUE HEPA FILTER
(2 PCS)
D. FILTERED AIR OUTLET
E.
FILTER INDICATOR LIGHT
F.
RESET HOLE
G. IONIZER LIGHT
H. IONIZER CONTROL
I.
SPEED CONTROL
J.
POWER LIGHT
Fig. 1
E
I
J
B
A
C
D
G
F
H
Top of The Unit
Fig. 2
HAP716_17EM1.indd
2
1/12/17
9:25 AM