Holmes HAP9423 Product Manual - Page 2

Important Safeguards, Please Read And Save, These Important, Safety Instructions - air purifier

Page 2 highlights

IM P O RTANT S A F E G U ARD S When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons. These precautions include: 1. Read all instructions before using the appliance. 2. To avoid fire or shock hazard, plug the appliance directly into a 120V AC electrical outlet. 3. If the Filter is covered by a bag when shipped, remove plastic bag before use. 4. Keep the cord out of heavy traffic areas. To avoid fire hazard, NEVER put the cord under rugs, near heat registers, radiators, stoves, or heaters. 5. To protect against electrical hazards, DO NOT immerse the appliance in water or other liquids. Do not use near water. 6. Close supervision is necessary when any appliance is used by or near children, or disabled persons. 7. Always unplug the air purifier before moving or cleaning the unit, opening the grill, changing the filter and whenever the unit is not in use. To disconnect the unit, be sure to pull the plug and not the cord. 8. NEVER drop or insert any objects into the openings of the unit. 9. DO NOT operate any appliance with a damaged cord or plug. If the motor fan fails to operate or the unit has been dropped or damaged in any manner, return appliance to manufacturer for examination and/or repair. 10. Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by Jarden Consumer Solutions may cause hazards. 11. DO NOT use outdoors. 12. NEVER place on a soft surface such as a bed or sofa as this could cause the unit to tip over and block the air inlet or outlet grills. 13. Keep unit away from heated surfaces and open flames. 14. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by Jarden Consumer Solutions or an authorized Jarden Consumer Solutions Center. 15. DO NOT place anything on top of unit. 16. NEVER use detergents, gasoline, glass purifier, furniture polish, paint thinner, or other household solvents to clean any part of the appliance. 17. Always turn the appliance off before unplugging it. 18. The ionizer in this appliance produces less ozone than the UL established limits of 50ppb (parts per billion). However, in high concentrations, ozone can be harmful to birds and small pets. To prevent ozone buildup, we suggest using the ionizer in well ventilated areas with the fan on. 19. This appliance should only be used in a room with temperatures between 40° F and 110° F. 20. WARNING: To reduce the risk of fire or electric shock, DO NOT use this appliance with any solid-state speed control device. PLEASE READ AND SAVE THESE IMPORTANT safety instructions This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not attempt to modify this plug or defeat this safety feature in any way. HAP9243_HAP9415_HAP9423-UA_12EM2.indd 2 F EAT U RE S CORD SAFETY • The length of cord used on this appliance was selected to reduce tangling or tripping hazards. • If a longer cord is necessary, an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the electrical rating of the air purifier (see rating label marked on bottom of the product). • Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over. GET TO KNOW YOUR AIR PURIFIER This unit is compatible with all Aer1® Filters. This allows you to choose the filter that is just right for you. Below is information on each filter: TOTAL AIR - Advanced Dust Eliminating Technology ODOR ELIMINATOR - 10x the odor fighting power ALLERGEN REMOVER - 99.97% True HEPA technology improves air quality for allergy sufferers ALLERGEN PERFORMANCEPLUS - 99.99% True HEPA technology improves air quality for allergy sufferers. SMOKE GRABBER - 99% effective at removing smoke from the air steam (*as small as 0.3 microns from air passing through the filter) IONIZER This appliance has an optional ionizer feature which, when turned on, releases negative ions into outgoing filtered air to help the air purification process. What Are Ions? Ions are tiny particles that carry a positive or negative charge. They exist naturally around us: in the air, water, and ground. Both positive and negative ions are colorless, odorless, and harmless. How Does The Ionizer Work? Negative ions help air purification by attaching themselves to very small airborne particles in the room. These particles take on a negative charge and may join with positively charged particles such as dust, pollen, smoke, and pet dander to form larger particles. These larger particles are then more easily captured by the filter system. Important Notes: Your ionizer may produce an occasional popping or cracking sound. This is normal and occurs when a small buildup of ions is discharged. After extended use, you may notice dust around the grills or front panel. This is caused by negative ions exiting the air outlet, evidence of the ionizer's air cleaning effectiveness. You can remove the dust with a soft brush or clean, damp cloth. Larger particles may be attracted to positively charged surfaces throughout the home, like walls or floors. • This may occur more frequently when the filter is nearing the end of its usable product life and is unable to capture as many charged particles. • Excessive amounts of pet dander, dust, or smoke may decrease the life expectancy of the filter and interfere with the ionization process. To help prevent particles from attracting to surfaces throughout your home: • You may want to run the ionizer less often. • Check the condition of the filter(s) more frequently. CAUTION: The ionizer in this appliance produces less ozone than the UL established limits of 50ppb. However, in high concentrations, ozone can be harmful to birds and small pets. To prevent ozone buildup, we suggest using the ionizer in well ventilated areas with the air purifier fan on. HIGH, MEDIUM AND LOW SPEED SETTINGS For optimum air filtration, operate your Holmes® air purifier continuously on the MEDIUM (2) setting. Its rugged motor has been designed to give many years of use. For quieter operation (such as in a bedroom), select the LOW (1) setting. When high levels of air pollution are present, select the HIGH (3) setting to quickly circulate and filter the air in the room. F EAT U RE S - O P ERATI O N S VISIPURETM FILTER REMINDER DIAL Your Holmes® Air Purifier includes Aer1® Total-Air Filter(s), specially designed to deliver cleaner air allowing you to dust less often!! The Aer1® Total-Air filter(s) last 4 months. See back panel for other filter options. The VisipureTM feature includes a magnifying glass which allows you to get a magnified view of the dirt being collected in the filter and see if the filter needs replacement. The Filter Reminder Dial helps you keep track of when to change the filter. BEFORE USE 1. Carefully unpack your Air Purifier. Select a firm level place where there are no obstructions to the air inlet or filtered air outlet. 2. Remove the air inlet grill and check if the filter is covered by a plastic bag. If it is, remove plastic bag before use and place filters into unit. Reinstall the air inlet grill. 3. This unit is equipped with a filter that lasts 4 months. Please set the Filter Change Reminder to 4 months from date of purchase. If you have a 12 month filter, set the wheel from 12 months from date of purchase. This will serve as a reference for when filter replacement is needed. NOTE: DO NOT POINT FILTERED AIR OUTLET TOWARDS WALL. OPERATING INSTRUCTIONS 1. Plug into a 120V AC electrical outlet. 2. Select the desired operating speed; HI (3), MEDIUM (2), LOW (1), by turning Speed Control Switch to the appropriate setting. For optimum air filtration, it is recommended to operate the air purifier continuously. Its rugged motor has been designed to give many years of use. 3. To release negative ions into the filtered air, press the ionizer button ( ) to ON and the button will illuminate in blue. NOTE: The ionizer will not work unless the unit is running. Fig. 1 E B A D C I F A F D C HG I HG F A A. Control Panel B. Speed Control Switch C. VisipureTM Magnifying Glass D. Filter Reminder Dial G H I D C E. Ionizer Button F. Filtered Air Outlet G. Aer1® Filter(s) H. Washable Foam Pre-Filter I. Air Inlet Grill CLEANING/MAINTENANCE INSTRUCTIONS 1. Turn the air purifier off and unplug it before cleaning. 2. The outside of the air purifier can be cleaned with a soft, clean damp cloth. 3. The air inlet grill (reference Fig. 1) can be removed and washed in warm soapy water (not dishwasher safe). Dry before replacing in the unit. 4. The filtered air outlet can be cleaned of dust with a small, soft brush. 5. If you wish to clean the inside filter chamber of the air purifier, please only use a dry, soft cloth to wipe it down. C L EANIN G / MAINTENAN C E F I LTER RE P L A C EMENT WARNING: Do not allow moisture to come in contact with the main housing of the air purifier. FILTER REPLACEMENT INSTRUCTIONS IMPORTANT: • DO NOT attempt to wash and re-use the Aer1® Filters. • If the filters are enclosed in plastic bags, remove them before use. NOTE: Every few weeks, check the condition of filter(s). The VisipureTM feature includes a magnifying glass which allows you to get a magnified view of the dirt being collected in the filter. The Filter Reminder Dial also helps you keep track of when to change the filters. Filter life will vary, depending on air quality and usage (see below). Under normal conditions of continuous use, the Aer1 Total Air, Odor and Smoke Filters will last 4 months while the Allergen and Allergen PerformancePlus Filters will last 12 months. After approximately 4 months of operation, check the condition of the filter through the VisipureTM magnifying glass and use Filter Reminder Dial to keep track on how long a filter has been in use. • Filters with a 4 month filter life: Wash the foam prefilter and replace the Aer1® filter(s) after 4 months of operation. • Filters with a 12 month filter life: After 4 months of operation, it is recommended to wash the foam prefilter and check the condition of your filter(s) through the VisipureTM magnifying glass. The filters must be replaced after 12 months of operation. To replace your filter(s): 1. Turn off and unplug the Fig. 2 air purifier. 2. Open the air inlet grill and examine the black foam prefilter. Remove any dust or lint and wash in warm soapy water. Rinse, air dry and place back into grill Fig. 3 inlet. 3. Remove the used Aer1® filter(s) from the unit by pulling it gently towards you and discard it. DO NOT attempt to clean the Aer1® filters. 4. Install the new Aer1® filter(s) into the unit.This model utilizes a hang tab and filter clip(s) to insure that the filter(s) are properly in place. Before replacing the filter(s), make sure that the hang tab is securely in place. The clip(s) can only be attached to the tabs on the filter(s) one way. The filter clip(s) should easily slide onto the filter hang tab with only a small amount of pressure. DO NOT use force while attaching the clip to the filter. (Fig. 2) 5. Align the clip(s) on the side of Aer1® filter(s) with rails on the inside of the purifier unit. Gently slide the filter(s) onto the rail. (Fig. 3) 6. Replace air inlet grill. 7. Turn the Filter Reminder Dial to select the current month you are replacing the new filter(s). This will serve as reference for when filter replacement is needed. Filters can be purchased at a retailer near you, online at www.Aer1® filters.com, or by calling (855) Try-Aer1®. Air Purifier Model Number HAP9243/HAP9415 HAP9423 Filter Quantity Needed 1 2 Compatible with all filter models below HAPF30AT HAPF30AO HAPF30AS HAPF300AH HAPF300AP (D filter) HAPF30 (A filter) Filter Description Aer1® Total Air Filter Aer1® Odor Filter Aer1® Smoke Grabber Filter Aer1® Allergen Remover Filter Aer1® Allergen PerformancePlus "D" Filter Holmes® "A" Filter 10/15/12 9:25 AM

  • 1
  • 2

IMPORTANT SAFEGUARDS
FEATURES
VISIPURE
TM
FILTER REMINDER DIAL
Your Holmes
®
Air Purifier includes Aer1
®
Total-Air
Filter(s), specially designed to deliver cleaner air allowing
you to dust less often!! The Aer1
®
Total-Air filter(s) last 4
months. See back panel for other filter options.
The Visipure
TM
feature includes a magnifying glass which
allows you to get a magnified view of the dirt being
collected in the filter and see if the filter needs
replacement. The Filter Reminder Dial helps you keep
track of when to change the filter.
BEFORE USE
1.
Carefully unpack your Air Purifier. Select a firm level
place where there are no obstructions to the air inlet
or filtered air outlet.
2.
Remove the air inlet grill and check if the filter is
covered by a plastic bag. If it is, remove plastic bag
before use and place filters into unit. Reinstall the air
inlet grill.
3.
This unit is equipped with a filter that lasts 4 months.
Please set the Filter Change Reminder to 4 months
from date of purchase. If you have a 12 month
filter, set the wheel from 12 months from date of
purchase. This will serve as a reference for when filter
replacement is needed.
NOTE: DO NOT POINT FILTERED AIR OUTLET TOWARDS WALL.
OPERATING INSTRUCTIONS
1. Plug into a 120V AC electrical outlet.
2. Select the desired operating speed; HI (3), MEDIUM
(2), LOW (1), by turning Speed Control Switch to the
appropriate setting. For optimum air filtration, it is
recommended to operate the air purifier continuously.
Its rugged motor has been designed to give many
years of use.
3. To release negative ions into the filtered air, press the
ionizer button (
) to ON and the button will
illuminate in blue.
NOTE:
The ionizer will not work unless the unit is
running.
CLEANING/MAINTENANCE INSTRUCTIONS
1.
Turn the air purifier off and unplug it before
cleaning.
2. The outside of the air purifier can be cleaned with a
soft, clean damp cloth.
3. The air inlet grill (reference Fig. 1) can be removed
and washed in warm soapy water (not dishwasher
safe). Dry before replacing in the unit.
4. The filtered air outlet can be cleaned of dust with a
small, soft brush.
5.
If you wish to clean the inside filter chamber of the air
purifier, please only use a dry, soft cloth to wipe it down.
CORD SAFETY
The length of cord used on this appliance was
selected to reduce tangling or tripping hazards.
If a longer cord is necessary, an approved extension
cord may be used. The electrical rating of the
extension cord must be equal to or greater than the
electrical rating of the air purifier (see rating label
marked on bottom of the product).
Care must be taken to arrange the extension cord so
that it will not drape over the countertop or tabletop
where it can be pulled on by children or accidentally
tripped over.
GET TO KNOW YOUR AIR PURIFIER
This unit is compatible with all Aer1
®
Filters. This allows
you to choose the filter that is just right for you. Below is
information on each filter:
TOTAL AIR
- Advanced Dust Eliminating Technology
ODOR ELIMINATOR
- 10x the odor fighting power
ALLERGEN REMOVER
- 99.97% True HEPA technology
improves air quality for allergy sufferers
ALLERGEN PERFORMANCEPLUS
- 99.99% True HEPA
technology improves air quality for allergy sufferers.
SMOKE GRABBER
- 99% effective at removing smoke
from the air steam (*as small as 0.3 microns from air
passing through the filter)
IONIZER
This appliance has an optional ionizer feature which,
when turned on, releases negative ions into outgoing
filtered air to help the air purification process.
What Are Ions?
Ions are tiny particles that carry a positive or negative
charge. They exist naturally around us: in the air, water,
and ground. Both positive and negative ions are colorless,
odorless, and harmless.
How Does The Ionizer Work?
Negative ions help air purification by attaching
themselves to very small airborne particles in the room.
These particles take on a negative charge and may join
with positively charged particles such as dust, pollen,
smoke, and pet dander to form larger particles. These
larger particles are then more easily captured by the
filter system.
Important Notes:
Your ionizer may produce an occasional popping or
cracking sound. This is normal and occurs when a small
buildup of ions is discharged.
After extended use, you may notice dust around the grills
or front panel. This is caused by negative ions exiting the
air outlet, evidence of the ionizer’s air cleaning
effectiveness. You can remove the dust with a soft brush
or clean, damp cloth.
Larger particles may be attracted to positively charged
surfaces throughout the home, like walls or floors.
This may occur more frequently when the filter is
nearing the end of its usable product life and is
unable to capture as many charged particles.
Excessive amounts of pet dander, dust, or smoke may
decrease the life expectancy of the filter and
interfere with the ionization process.
To help prevent particles from attracting to surfaces
throughout your home:
You may want to run the ionizer less often.
Check the condition of the filter(s) more frequently.
CAUTION:
The ionizer in this appliance produces less
ozone than the UL established limits of 50ppb. However,
in high concentrations, ozone can be harmful to birds and
small pets. To prevent ozone buildup, we suggest using
the ionizer in well ventilated areas with the air purifier
fan on.
HIGH, MEDIUM AND LOW SPEED
SETTINGS
For optimum air filtration, operate your Holmes
®
air
purifier continuously on the MEDIUM (2) setting. Its
rugged motor has been designed to give many years of
use. For quieter operation (such as in a bedroom), select
the LOW (1) setting. When high levels of air pollution are
present, select the HIGH (3) setting to quickly circulate
and filter the air in the room.
When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock, and injury to persons. These precautions include:
1. Read all instructions before using the appliance.
2. To avoid fire or shock hazard, plug the appliance
directly into a 120V AC electrical outlet.
3. If the Filter is covered by a bag when shipped,
remove plastic bag before use.
4. Keep the cord out of heavy traffic areas. To avoid
fire hazard, NEVER put the cord under rugs, near
heat registers, radiators, stoves, or heaters.
5. To protect against electrical hazards, DO NOT
immerse the appliance in water or other liquids. Do
not use near water.
6. Close supervision is necessary when any appliance is
used by or near children, or disabled persons.
7. Always unplug the air purifier before moving or
cleaning the unit, opening the grill, changing the
filter and whenever the unit is not in use. To
disconnect the unit, be sure to pull the plug and not
the cord.
8. NEVER drop or insert any objects into the openings of
the unit.
9. DO NOT operate any appliance with a damaged cord
or plug. If the motor fan fails to operate or the unit
has been dropped or damaged in any manner, return
appliance to manufacturer for examination and/or
repair.
10. Use appliance only for intended household use as
described in this manual. Any other use not
recommended by the manufacturer may cause fire,
electric shock, or injury to persons. The use of
attachments not recommended or sold by Jarden
Consumer Solutions may cause hazards.
11. DO NOT use outdoors.
12. NEVER place on a soft surface such as a bed or sofa
as this could cause the unit to tip over and block the
air inlet or outlet grills.
13.
Keep unit away from heated surfaces and open flames.
14. DO NOT attempt to repair or adjust any electrical or
mechanical functions on this unit. Doing so will void
your warranty. The inside of the unit contains no user
serviceable parts. All servicing should be performed
by Jarden Consumer Solutions or an authorized
Jarden Consumer Solutions Center.
15. DO NOT place anything on top of unit.
16. NEVER use detergents, gasoline, glass purifier,
furniture polish, paint thinner, or other household
solvents to clean any part of the appliance.
17. Always turn the appliance off before unplugging it.
18.
The ionizer in this appliance produces less ozone than
the UL established limits of 50ppb (parts per billion).
However, in high concentrations, ozone can be harmful
to birds and small pets. To prevent ozone buildup, we
suggest using the ionizer in well ventilated areas with
the fan on.
19. This appliance should only be used in a room with
temperatures between 40° F and 110° F.
20.
WARNING:
To reduce the risk of fire or electric
shock, DO NOT use this appliance with any solid-state
speed control device.
PLEASE READ AND SAVE
THESE IMPORTANT
SAFETY INSTRUCTIONS
FEATURES - OPERATIONS
CLEANING/MAINTENANCE
FILTER REPLACEMENT
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to
install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS
SAFETY FEATURE IN ANY WAY.
WARNING:
Do not allow moisture to come in
contact with the main housing of the air purifier.
FILTER REPLACEMENT INSTRUCTIONS
IMPORTANT:
DO NOT attempt to wash and re-use the Aer1
®
Filters.
If the filters are enclosed in plastic bags, remove
them before use.
NOTE:
Every few weeks, check the condition of filter(s). The
Visipure
TM
feature includes a magnifying glass which
allows you to get a magnified view of the dirt being
collected in the filter. The Filter Reminder Dial also helps
you keep track of when to change the filters. Filter life
will vary, depending on air quality and usage (see
below). Under normal conditions of continuous use, the
Aer1
Total Air, Odor and Smoke Filters will last 4 months
while the Allergen and Allergen PerformancePlus Filters
will last 12 months.
After approximately 4 months of operation, check the
condition of the filter through the Visipure
TM
magnifying
glass and use Filter Reminder Dial to keep track on how
long a filter has been in use.
Filters with a 4 month filter life: Wash the foam pre-
filter and replace the Aer1
®
filter(s) after 4 months
of operation.
Filters with a 12 month filter life: After 4 months of
operation, it is recommended to wash the foam pre-
filter and check the condition of your filter(s) through
the Visipure
TM
magnifying glass. The filters must be
replaced after 12 months of operation.
To replace your filter(s):
1.
Turn off and unplug the
air purifier.
2.
Open the air inlet grill and
examine the black foam
prefilter. Remove any dust
or lint and wash in warm
soapy water. Rinse, air dry
and place back into grill
inlet.
3.
Remove the used Aer1
®
filter(s) from the unit by
pulling it gently towards
you and discard it. DO
NOT attempt to clean the
Aer1
®
filters.
4. Install the new Aer1
®
filter(s) into the unit.This
model utilizes a hang tab and filter clip(s) to insure
that the filter(s) are properly in place. Before replacing
the filter(s), make sure that the hang tab is securely
in place. The clip(s) can only be attached to the tabs
on the filter(s) one way. The filter clip(s) should
easily slide onto the filter hang tab with only a small
amount of pressure. DO NOT use force while
attaching the clip to the filter. (Fig. 2)
5. Align the clip(s) on the side of Aer1
®
filter(s) with
rails on the inside of the purifier unit. Gently slide the
filter(s) onto the rail. (Fig. 3)
6. Replace air inlet grill.
7. Turn the Filter Reminder Dial to select the current
month you are replacing the new filter(s). This will
serve as reference for when filter replacement is
needed.
Filters can be purchased at a retailer near you, online at www.Aer1
®
filters.com, or by calling (855) Try-Aer1
®
.
Air Purifier
Model Number
Filter Quantity
Needed
Compatible with all
filter models below
Filter
Description
HAP9243/HAP9415
1
HAPF30AT
HAPF30AO
HAPF30AS
HAPF300AH
HAPF300AP (D filter)
HAPF30 (A filter)
Aer1
®
Total Air Filter
Aer1
®
Odor Filter
Aer1
®
Smoke Grabber Filter
Aer1
®
Allergen Remover Filter
Aer1
®
Allergen PerformancePlus
"D" Filter
Holmes
®
"A" Filter
HAP9423
2
Fig. 3
Fig. 2
Fig. 1
A. Control Panel
B. Speed Control
Switch
C. Visipure
TM
Magnifying Glass
D. Filter Reminder Dial
E.
Ionizer Button
F.
Filtered Air Outlet
G. Aer1
®
Filter(s)
H. Washable Foam
Pre-Filter
I.
Air Inlet Grill
E
B
F
C
D
I
H
G
A
G
H
I
C
D
A
F
F
G
H
I
A
C
D
HAP9243_HAP9415_HAP9423-UA_12EM2.indd
2
10/15/12
9:25 AM