Holmes HNF0466 Instruction Manual - Page 2

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should always be taken including the following: 1. Read all instructions before using this appliance. 2. Use fan only for purposes described in the instruction manual. 3. To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids and plug the appliance directly into a USB outlet. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from USB outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning. 6. Avoid contact with moving parts. 7. Do not operate in the presence of explosive and/or flammable fumes. 8. To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance. 9. Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner. Discard fan or return to an authorized service facility for examination and/or repair. 10. Do not run cord under carpeting. Do not cover cord with throw rugs, runner, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over. 11. The use of attachments not recommended or sold by the appliance manufacturer may cause hazards. 12. Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high traffic areas. 13. Do not use outdoors. 14. To disconnect, grip plug and pull from USB outlet. 15. Always use on a dry, level surface. 16. Do not operate fan until fully assembled with all parts properly in place. 17. This product is intended for household use ONLY and not for commercial or industrial applications. 18. WARNING: To reduce the risk of electrical shock and injury to persons, do not use in window. 19. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS FEATURES - OPERATIONS ASSEMBLY INSTRUCTIONS Your fan comes fully assembled and is ready for use. OPERATING INSTRUCTIONS The On/Off switch is located on the side of the base. Simply slide the switch to turn the fan On or Off. TILT ADJUSTMENT INSTRUCTIONS To adjust the angle of the fan head simply move the fan head to the desired angle. CLEANING/MAINTENANCE INSTRUCTIONS Follow these instructions to correctly and safely care for your personal fan. Please remember: FAN CLEANING • Always unplug the fan before cleaning or disassembling. • Do not allow water to drip on or enter into fan housing. • Be sure to use a soft cloth moistened with a mild soap solution. • Do not use any of the following as a cleaner: gasoline, thinner, or benzene. Figure 1 Front Grill Fan Blade On/Off Switch USB Port (not shown) CLEANING/MAINTENANCE INSTRUCTIONS Fan Blade Cleaning Instructions 1. Using a small screw driver, remove the three clips from the fan grill. 2. Remove front grill. 3. Clean blade with a soft cloth moistened with a mild soap solution. 4. Place front grill onto rear grill and secure with the clips removed in the first step. FAN STORAGE When storing your fan in the off season, it is important to keep it in a safe dry location. It is important to protect the fan head from dust. We strongly recommend using the original box from purchase. If you have any questions regarding your product or would like to learn more about other Holmes® products, please visit our website at www.holmesproducts.com. For inquiries regarding recycling and proper disposal of this product, please contact your local waste management facility. Figure 2 PLUGS INTO A 5 VOLT USB PORT, ADAPTER, OR POWER SUPPLY. THE USE OF ATTACHMENTS NOT RECOMMENDED OR SOLD BY THE APPLIANCE MANUFACTURER MAY CAUSE HAZARDS. USB Power Cord HNF0466_15EM1.indd 2 9/10/15 09:42