Homelite UT09525 Engine Starting Procedure - Page 1
Homelite UT09525 Manual
View all Homelite UT09525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
WARNING: This Engine Starting Procedure is not a substitute for reading the operator's manual.To reduce the risk of injury, user must read and understand operator's manual before using this product. TO START: 1 2.6 oz. 1 GALLON GAS 2 50:1 Ratio = Mix 2.6 oz 2-cycle oil with 1 gallon of fresh gasoline in separate gas container. SHAKE. Pour into fuel tank. Slowly press the PRIMER BULB 10x. or until fuel appears. 3 SET choke lever to FULL choke. 4 Rotate throttle lever to FULL ( ) throttle. 5 Pull starter handle until engine attempts to start (4X max.) 6 SET choke lever to HALF choke. 7 8 TO STOP: 9 Pull starter handle until engine starts (6X max.) NOTE: If the unit has not started, return to step 3. Allow the engine to warm for 10 seconds, SET choke lever to RUN. SET the throttle to the STOP position. TO RESTART A WARM ENGINE: If the engine/unit is already hot: ENGINE STARTING PROCEDURE 3 6 8 5 7 4 9 1 2 SET choke lever to RUN. Rotate throttle lever to FULL ( ) throttle. Pull starter handle until engine starts. 1-800-242-4672 CALL www.homelite.com Make The Most Of Your Purchase! Go to www.homelite.com and register your new tool on-line. For any questions about operating or maintaining your product, call the Homelite® Help Line ! Your Product has been fully tested prior to shipment to ensure your complete satisfaction. Troubleshooting tips are available in your operator's manual. 988000-334 10-11-10 (REV:01) HOMELITE ART WORK Art Part No. : 988000-334 Rev. 01 Where Used : 988000-334 Refer to Drawings for Dimensions. Material: 60lb. Stock Paper. Color: Yellow. FRONT