Homelite UT10660 User Manual - Page 7

Wear Eye, Hearing,

Page 7 highlights

SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Safety Alert Indicates a potential personal injury hazard. Read Operator's Manual Wear Eye, Hearing, and Head Protection To reduce the risk of injury, user must read and understand operator's manual before using this product. Wear eye protection with side shields marked to comply with ANSI Z87.1 as well as hearing and head protection when operating this equipment. SAFE-T-TIP Nose Guard The SAFE-T-TIP nose guard on the guide bar helps prevent rotational kickback. No Smoking Operate With Two Hands One Handed Carbon Monoxide Kickback No smoking, sparks, or open flame. Hold and operate the saw properly with both hands. Do not operate the saw using only one hand. Engines produce carbon monoxide which is an odorless, deadly poison. Do not operate in an enclosed area. DANGER! Beware of kickback. Bar Nose Contact Avoid bar nose contact. Wear Gloves Wear Safety Footwear Gasoline and Lubricant Keep Bystanders Away Wear non-slip, heavy-duty protective gloves when handling the chain saw. Wear non-slip safety footwear when using this equipment. Use unleaded gasoline intended for motor vehicle use with an o­ ctane rating of 87 [(R + M)/2] or higher. This product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle lubricant. Keep all bystanders and animals at least 50 ft. away. Page 7 - English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120

Page 7
— English
Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
Safety Alert
Indicates a potential personal injury hazard.
Read Operator’s Manual
To reduce the risk of injury, user must read and
understand operator’s manual before using this
product.
Wear Eye, Hearing, and
Head Protection
Wear eye protection with side shields marked to comply
with ANSI Z87.1 as well as hearing and head protection
when operating this equipment.
SAFE-T-TIP Nose Guard
The SAFE-T-TIP nose guard on the guide bar helps
prevent
rotational kickback.
No Smoking
No smoking, sparks, or open flame.
Operate With Two
Hands
Hold and operate the saw properly with both hands.
One Handed
Do not operate the saw using only one hand.
Carbon Monoxide
Engines produce carbon monoxide which is an
odorless, deadly poison. Do not operate in an
enclosed area.
Kickback
DANGER! Beware of kickback.
Bar Nose Contact
Avoid bar nose contact.
Wear Gloves
Wear non-slip, heavy-duty protective gloves when
handling the chain saw.
Wear Safety Footwear
Wear non-slip safety footwear when using this
equipment.
Gasoline and
Lubricant
Use unleaded gasoline intended for motor vehicle use
with an octane rating of 87 [(R + M)/2] or higher. This
product is powered by a 2-cycle engine and requires
pre-mixing gasoline and 2-cycle lubricant.
Keep Bystanders Away
Keep all bystanders and animals at least 50 ft. away.
SYMBOLS