Homelite UT13124 User Manual - Page 16
Replacing Wheels, Storing The Mower - replacement parts
View all Homelite UT13124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
MAINTENANCE REPLACING WHEELS See Figure 16. To replace a wheel: Disconnect the mower from the power supply. � Turn the mower on its side. Using a flat blade screwdriver, pry off the hubcap. Remove the cotter pin from the wheel axle, then remove the wheel. Replace with new wheel and insert new cotter pin to secure. Replace hubcap. STORING THE MOWER See Figure 17. Disconnect the mower from the power supply. Turn mower on its side and clean grass clippings that have accumulated on the underside of the mower deck. Wipe the mower clean with a dry cloth. � Check all nuts, bolts, knobs, screws, fasteners, etc., for tightness. � Inspect moving parts for damage, breakage, and wear. Have repairs made on any damaged or missing parts. Store mower indoors in a clean, dry place out of the reach of children. Do not store near corrosive materials such as fertilizer or rock salt. To lower the handle before storing: Fully loosen the handle knobs on the sides of the handle and fold the upper handle down. Push inward on each side of the lower handle, and lift the sides of the lower handle past the edges of the handle mounting brackets. Fold the lower handle forward, making sure not to bend or kink the power cord. HUBCAP COTTER PIN HANDLE KNOBS WHEEL WHEEL AXLE Fig. 16 UPPER HANDLE LOWER HANDLE HANDLE MOUNTING BRACKET Fig. 17 Page 16