Homelite UT80993A User Manual - Page 16
Nozzle Selection Guide - no pressure
View all Homelite UT80993A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
OPERATION WARNING: NEVER change nozzles without locking the lock out on the trigger handle and NEVER point the wand at your face or at others. The quick-connect feature contains small springs that could eject the nozzle with some force. Failure to heed this warning could cause personal injury. Using the quick-connect collar, changing nozzles is easy. n Turn off the pressure washer and shut off the water supply. Pull trigger to release water pressure. To connect a nozzle to the trigger handle: n Engage the lock out on the trigger handle by pushing up on the lock out until it clicks into the slot. n Pull back the quick-connect collar. n Push the nozzle into place in the spray wand. n Push the collar forward so that the nozzle is secured properly. Check to see that the nozzle is secure. To disconnect a nozzle from the trigger handle once the cleaning job is complete: n Turn off the pressure washer and shut off the water supply. Pull trigger to release water pressure. n Engage the lock out on the trigger handle by pushing up on the lock out until it clicks into the slot. n Pull back and hold the quick-connect collar. n Remove the nozzle by pulling it from the quick-connect collar. Place nozzle in the nozzle storage area on the top of the machine. USING THE HIGH PRESSURE HOSE The high pressure hose features an outer covering that provides strength to the hose. If the outer covering becomes damaged, the hose must be replaced immediately. Do not use a high pressure hose if the outer covering is damaged. To prevent damage to the outer covering: n Inspect the hose before every use. n Fully unwrap and straighten hose before use. n Do not allow the high pressure hose to be kinked. n Keep hose away from hot surfaces and sharp edges. n Do not pull unit by high pressure hose. n Do not allow hose to be crushed or wrapped around objects. NOZZLE SELECTION GUIDE HIGH PRESSURE (NO SOAP WHEN USING THESE NOZZLES) LOW PRESSURE (FOR SOAP OR GENTLE RINSE) ABRASIVE Concrete, Brick, Masonry Siding, Gutters, House Fencing, Deck, Patio Lawn Equipment, Boat, RV 0º Red 25º Green 40º White Blue Soap Nozzle GENTLE Recommended Nozzle Use With Caution for Certain Applications Page 12 - English