Homelite UT905700 Quick Start Guide - Page 1

Homelite UT905700 Manual

Page 1 highlights

UT905700 5700 WATT GENERATOR WARNING: Do not connect to a building's electri- cal system unless the generator and transfer switch have been properly installed and the electrical output has been verified by a qualified electrician. Typical Generator Shown WARNING: This Quick Start Guide is not a substitute for reading the operator's manual. To reduce the risk of injury or death, user must read and understand operator's manual before using this product. Install the frame support. Refer to page 12 of the 1 operator's manual for more details. ASSEMBLY GUIDE Install the wheels. Refer to page 12 of the operator's 2 manual for more details. Securing the handle. Refer to page 12 of the 3 operator's manual for more details. Exhaust Port Pointed away from dwelling openings 988000-745 10-21-11 (REV:01) Add engine lubricant. Refer to page 13 of the 1 operator's manual for more details. QUICK START GUIDE Add fuel. Refer to page 14 of the operator's manual for 2 more details. Start the engine. Refer to page 13 of the operator's 3 manual for more details.  Unplug all loads from the generator.  Turn the fuel valve to the ON position (A).  Move choke lever right (B).  Put the engine switch in the ON position (C).  Grasp the recoil starter (D) and pull slowly until resistance is felt. Give the recoil starter a short, brisk pull to start the engine.  Let engine run for several seconds, then move choke lever left (E). C B, E ON OFF ON OFF A NO D DO NOT RETURN TO THE STORE! If you have any questions, please call: 1-800-242-4672 or visit our website at www.homelite.com Product style and configuration may vary.

  • 1
  • 2

ON
OFF
NO
Add engine lubricant.
Refer to page 13 of the
operator’s manual for more details.
UT905700
5700 WATT GENERATOR
Add fuel.
Refer to page 14 of the operator’s manual for
more details.
988000-745
10-21-11 (REV:01)
Start the engine.
Refer to page 13 of the operator’s
manual for more details.
Unplug all loads from the generator.
Turn the fuel valve to the ON position (
A
).
Move choke lever right (
B
).
Put the engine switch in the ON position (
C
).
Grasp the recoil starter (
D
) and pull slowly until
resistance is felt. Give the recoil starter a short, brisk
pull to start the engine.
Let engine run for several seconds, then move
choke lever left (
E
).
1
2
3
DO NOT RETURN TO THE STORE!
If you have any questions, please call: 1-800-242-4672
or visit our website at www.homelite.com
Product style and configuration may vary
.
2
Install the wheels.
Refer to page 12 of the operator’s
manual for more details.
Install the frame support.
Refer to page 12 of the
operator’s manual for more details.
1
3
Securing the handle.
Refer to page 12 of the
operator’s manual for more details.
Typical Generator
Shown
Exhaust Port
Pointed away from
dwelling openings
WARNING:
Do not connect to a building’s electri
-
cal system unless the generator and transfer switch have
been properly installed and the electrical output has been
verified by a qualified electrician.
WARNING:
This Quick Start Guide is not a substitute for reading the operator’s manual. To reduce the risk of injury or death, user must read and understand operator’s manual before using this product.
ASSEMBLY GUIDE
QUICK START GUIDE
D
C
A
B, E
ON
OFF