Honeywell 4600GHD051CE User Guide - Page 21
Connecting the Imager with USB
View all Honeywell 4600GHD051CE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Connecting the Imager with USB Note: See "Imager Models" on page 1-2 to determine which interfaces apply to your imager. An imager can be connected to the USB port of a computer. 1. Connect the appropriate interface cable to the imager first, then to the com- puter. 2. Program the imager for a USB interface using the Plug and Play barcodes beginning on page 1-9. 3. The imager beeps. 4. Verify the imager operation by scanning a barcode from the Sample Symbols in the back of this manual. For additional USB programming and technical information, refer to "USB Application Note," available at www.honeywell.com/aidc. 1 - 5
1 - 5
Connecting the Imager with USB
Note: See
"Imager Models"
on page 1-2 to determine which interfaces apply to
your imager.
An imager can be connected to the USB port of a computer.
1.
Connect the appropriate interface cable to the imager first, then to the com-
puter.
2.
Program the imager for a USB interface using the Plug and Play barcodes
beginning on
page 1-9
.
3.
The imager beeps.
4.
Verify the imager operation by scanning a barcode from the
Sample
Symbols
in the back of this manual.
For additional USB programming and technical information, refer to “USB Appli-
cation Note,” available at
www.honeywell.com/aidc.