Honeywell 4800dr Imaging Guide - Page 10

IMGSNP Modifiers P - Imaging Style This sets the Image Snap style. 0P Decoding Style. This processing allows a few frames to be taken until the exposure parameters are met. The last frame is then available for further use. 1P Photo Style (default). This mimics a simple digital camera, and results in a visually optimized image. 2P Manual Style. This is an advanced style that should only be used by an experienced user. It allows you the most freedom to set up the document reader, and has no auto-exposure. B - Beeper Causes a beep to sound after an image is snapped. 0B No beep (default) 1B Sounds a beep when the image is captured. T - Wait for Trigger Waits for a hardware button push before taking the image. This is only available when using Photo Style (1P). 0T Takes image immediately (default) 1T Waits for a button push, then takes the image L - LED State Determines if the LEDs should be on or off, and when. Ambient illumination (0L) is preferred for taking pictures of color documents, such as ID cards, especially when the document reader is in a stand. LED illumination (1L) is preferred when the document reader is hand held. LED State is not available when using Decoding Style (0P). 0L LEDs off (default) 1L LEDs on 1 - 2