Honeywell 6150RF User Guide - Page 2

User Mode This mode gives you the capability of enabling and disabling individual wireless keys that have been directly programmed into the ADEMCO 6150RF. This is particularly useful if a user loses a wireless key. This mode may only be accessed if the ADEMCO 6150RF is powered up for at least 1 minute. Only wireless keys programmed directly into the ADEMCO 6150RF may be enabled and disabled using this mode. ENTER THE USER MODE Press the [1] and [3] keys simultaneously for a few seconds (make sure the unit has been powered for at least 1 minute prior). CHANGING THE STATUS OF A TRANSMITTER On the display, "dE" and "-" flashes alternately. Enter the number of the wireless key transmitter (1-8). Then "d" and the wireless key number you entered flash alternately with "1" or "0" on the display. A "1" indicates the wireless key is enabled, a "0" indicates it is disabled. Enter [1] to enable or [0] to disable the wireless key. All wireless keys are defaulted to 1 (enabled). Press the [✳] to accept the entry. Repeat the procedure for all the wireless keys whose status you want to change. EXITING THE USER MODE To exit the User mode press [✳] when "dE" and "-" flash alternately on the display. ÊK4461-1V1eŠ K4461-1V1 4/05 Rev. A 165 Eileen Way, Syosset, New York 11791 Copyright © 2004 Honeywell International Inc. www.honeywell.com/security