Honeywell 8132I User Guide - Page 26
How to Send Emergency Messages
View all Honeywell 8132I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Security System Operation (cont'd) How to Send Emergency Messages An emergency message for panic or fire can be sent to the central monitoring station from the Emergency screen. The Emergency screen can be accessed by activating the "emergency" icon located in the lower-right hand corner of the displayed screen (see next page for a typical screen). "EMERGENCY" ICON AUI-022-V2 1. The Emergency screen cannot be accessed while running a diagnostic test or the touch screen calibration. The Emergency screen also cannot be accessed if the user is in an Internet session. 2. In some instances a pop-up window may be partially covering the "emergency" icon. If this is the case, you should first close the pop-up window by pressing either the Done or Cancel button, whichever may be appropriate, on the pop-up screen. Once the Emergency screen is accessed, perform the following to send an emergency message. SCREEN ACTION On the Emergency screen press and hold (for at least 2 seconds) the associated alarm button for the type of emergency message you want to send (Panic or Fire). When the message is sent, the associated "Message Sent" statement is displayed in the text box to the right of the buttons. You are immediately returned to the screen from which you pressed the "Emergency" icon. 26