Honeywell CT3650 Owner's Manual - Page 17
Step 10. Operating Your Thermostat
View all Honeywell CT3650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
STEP 10. OPERATING YOUR THERMOSTAT Change Temperature Setting Until the Next Program Period (Temporary Change) ❑ Press or until the screen shows the desired temperature setting. NOTE: The temporary temperature setting is displayed for about 3 seconds and then the room temperature is displayed. Temporary appears in the display. The setting cancels when the next program period starts or when you press Run Program . Change Temperature Setting Indefinitely (Hold) ❑ Press System until "Heat" or "Cool" is displayed. ❑ Press Hold Temp then or to change your setting if desired. (The display changes from showing the setpoint temperature to room temperature after approximately three seconds). ❑ To cancel "Hold" press Run Program . Change the Temperature Setting Until a Designated Day and Period (Vacation Hold) ❑ Press Hold Temp twice. ❑ Press or until the display shows the desired temperature setpoint. ❑ Press Time until the desired number of days that you will be away (1 through 255) is displayed. ❑ Press , Wake , Leave Return or Sleep to select the program period when you want the program to restart. NOTE: If the Vacation Hold needs to be cancelled before the designated time, press Run Program to return to the program. Daylight Savings Time Key This feature allows you to switch between standard time and daylight savings time. ❑ Press Daylight Time during fall to set the time back one hour. 17 69-1285-2