Honeywell CT54 Owner's Manual - Page 3
Step 5. Set Heat Anticipator, On New Thermostat, Step 6. Operating New, Thermostat, If You Have
View all Honeywell CT54 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
STEP 5. SET HEAT ANTICIPATOR ON NEW THERMOSTAT 1. Set the heat anticipator lever to the number that you recorded in Step 2. Remove Old Thermostat, sub-step 4 (see Fig. 7). CT54 THERMOSTAT STEP 6. OPERATING NEW THERMOSTAT 1. Adjust the temperature setting lever to your desired setting. If it is too warm, lower the temperature setting. If it is too cool, raise the temperature setting. HEAT ANTICIPATOR IF YOU HAVE A PROBLEM .18 .2 .9 .7 .5 R O N GE .4 .25 .3 THIS POINT SHOULD ALIGN WITH HEAT ANTICIPATOR SETTING PLACE FINGER HERE TO MOVE LEVER L L DATE CODE MODEL NO. .18 .2 .9 .7 .5 O .25 N GE .3 R .4 M19650 Fig. 7. Heat anticipator on new thermostat. 2. If you could not find a heat anticipator setting on your old thermostat, use the setting listed in Table 1 for your type of heating system. Table 1. Heat Anticipator Setting. Heating System Heat Anticipator Setting (Amps) Hot Water .8 High Efficiency Warm Air (90% or .8 better) Gas or Oil Warm Air .4 Electric .3 If. . . Heating system • does not come on. • • • Heating system runs • too long to maintain • a comfortable temperature. Heating system • needs to run longer • to maintain a comfortable temperature. Then. . . Make sure the temperature setting is above the room temperature. Make sure the circuit breaker is not tripped and reset it if necessary. Make sure the power switch at the equipment is in the On position. Wait 5 minutes for the system to respond. Verify the thermostat is level. Adjust heat anticipator lever clockwise one scale mark (see Fig. 7). Do not adjust heat anticipator below .3 Amps. Verify the thermostat is level. Adjust heat anticipator lever counterclockwise, in the direction of the arrow, one scale mark (see Fig. 7). Customer Assistance Please read and follow the provided instructions for this thermostat. For additional information, go to www.honeywell.com/your home or call Honeywell Customer Care at 1-800-468-1502. Before calling, please have the following information available: • Thermostat model number and date code (refer to Fig. 6 for the location of the model number and date code). • Type of heating system (for example: gas or oil; warm air, hot water). 3. Place the cover on the thermostat and turn the power back on. If the heating system runs too long to maintain a comfortable temperature, adjust heat anticipator lever clockwise one scale mark (see Fig. 7). Do not adjust heat ancitipator below .3 Amps. If the heating system needs to run longer to maintain a comfortable temperature, adjust heat anticipator lever counterclockwise, in the direction of the arrow, one scale mark (see Fig. 7). 3 69-1696EF