Honeywell HE265A1007 Owners Guide - Page 3
Operating Your Humidifier - installation
View all Honeywell HE265A1007 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
HE225A,B AND HE265A,B BY-PASS FLOW-THROUGH HUMIDIFIERS OPERATING YOUR HUMIDIFIER HE225A,HE265A Your Enviracaire Elite™ HE225A and HE265A Humidifiers from Honeywell are controlled by the H8908B Convertible Humidity Control. The convertible humidity control is installed either on an interior wall in the living area, or on the return air duct. Choose the humidity control setting using the combination relative humidity/outdoor temperature setting scale on your humidity control dial. Match the dial setting to the outdoor temperature for optimizing the humidity level while reducing moisture condensation on your windows. The table below can also be used to adjust humidity control to the recommended setting. Humidity Control Régulateur d'humidité OUTDOOR TEMPERATURE -20 °F -30 °C -10 °F -25 °C 0 °F -20 °C +10 °F -10 °C +20 °F -5 °C Over 20 °F Over 0 °C HUMIDITY SETTING 15% 20% 25% 30% 35% 40% M14694 At Outside Temperature -20°F (-29°C) -10°F (-23°C) 0°F (-18°C) Recommended Control Setting 15 20 25 At Outside Temperature +10°F (-12°C) +20°F (-7°C) Above 20°F (-7°C) Recommended Control Setting 30 35 40 NOTE: As outside temperature drops, the recommended humidity control setting is lowered to adjust for effects of dewpoint. These settings should reduce accumulation of moisture and ice on your windows and other areas of your home. Some indoor activities such as cooking, showering and clothes drying can cause excessive levels of humidity and start the accumulation of moisture on your windows. NOTE: If this condition persists for more than a few hours, set the humidity control to the lowest setting to turn off the humidifier. If the condition does not improve, ventilate your home to remove the moisture. HE225B,HE265B Your Enviracaire Elite™ HE225B and HE265B Humidifiers are ontrolled by the Honeywell H1008 Automatic Humidity Control with HumidCalc+™. The automatic humidity control is mounted in the return air duct where it can be exposed to the air stream of the return air. H1008A M12817 3 69-1423EF-3