Honeywell HNVE1 Reference Guide - Page 49
PTZ Settings on the Live View Tab, PTZ Controls, Table 4-2, Icons in the PTZ Control
View all Honeywell HNVE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
HNVE1 V2.1 1-Channel Encoder Reference Guide Figure 4-5 PTZ Controls For panning and tilting the PTZ dome, click the arrows in the PTZ control. The icons in the PTZ control are used for controlling (zoom, focus, and iris) the PTZ camera lens. The following table lists the functions of the PTZ control icons. Table 4-2 Icons in the PTZ Control Icon Zoom In Zoom Out Iris Close Auto Iris Iris Open Focus Far Auto Focus Focus Near Click to... Enlarge the area of interest. Reduce the area of interest. Close the camera iris to darken the video display. Enable the camera auto iris mode. In auto iris mode, the camera iris automatically adjusts according to the light conditions. Open the camera iris to brighten the video display. Clearly view objects that are at a distance. Enable the camera auto focus mode. In auto focus mode, the camera lens adjusts automatically after a pan, tilt, or zoom command. Clearly view nearby objects. PTZ Settings on the Live View Tab When a PTZ dome is installed (for example, a Honeywell ACUIX™) you can: • Move and control the PTZ dome while viewing video • Run presets and tours configured in the PTZ Dome Setup view • Run customized presets, preset tours, and mimic tours Document 800-04195 Rev B 49 11/09