Honeywell HRDP16D50 User Guide - Page 32
System Configuration Continued, Upgrade Firmware, Use DST, NTP Type, Keypad Beep, Auto Log Off
View all Honeywell HRDP16D50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Setup System Configuration Continued Use DST - After completing the Time Zone setup, highlight USE DST and press ENTER to turn Daylight Saving Time ON / OFF. NTP Type - Highlight NTP (Network Time Protocol) and press ENTER to SYNC the DVR with the Network Time. Keypad Beep - ON / OFF [Enables / Disables Audible keypad touch confirmation]. Auto Log Off - OFF or 1-10 Minutes [This feature will close the Configuration Menu after XX minutes of inactivity. This is a security feature.] S/W Upgrade - Start firmware upgrade from selected media (USB or CD/DVD) Upgrade Firmware 1. Press SETUP on the front panel or remote control. or Click MENU on the hover menu and select SETUP. 2. Select SYSTEM > SYSTEM CONFIGURATION. 3. Click S/W UPGRADE to open the UPGRADE FIRMWARE window. 4. Insert the CD/DVD or USB device. 5. Select the media type (DVD/CD-ROM / USB HDD/STICK). 6. Click SCAN. 7. Click OK to start the upgrade. 32