Honeywell HRSD40F250 User Guide - Page 74
Configuring for Remote Control, Configuring Recording Settings
View all Honeywell HRSD40F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Configuring for Remote Control HRSD40F DVR User Guide The Remote Control setup screen allows you to select a port and make correct settings for a remote keyboard. 1. Highlight Remote Control in the Devices menu and press Control setup screen appears. . The Remote Figure 3-42 Remote Control Setup Screen 2. Highlight the field beside Port and select between None, RS232, and RS485. If the RS232 port and RS485 port is in use for PTZ control, networking, or text input, then the remote keyboard cannot be configured. 3. Highlight Setup... and select the correct Baud Rate, Parity, Data Bits, and Stop Bits for the device you are connecting to the DVR. 4. Highlight the box beside Remote Control Product and select your device from the list. 5. Save your Remote Control settings by highlighting Save and pressing . Select Cancel to exit the screen without saving the changes. Configuring Recording Settings Your DVR offers a variety of flexible recording modes. You can set it to: • Record all the time • Record only events • Continue recording after the hard disk drive is full by recording over the oldest video • Alert you and stop recording when the hard disk is full 74