Honeywell HUT102 User Guide - Page 7
Problem, Possible Cause, Corrective Action - instructions
UPC - 092926344276
View all Honeywell HUT102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Troubleshooting PROBLEM POSSIBLE CAUSE Power Switch is set to "On" and Power Light is off 1. Unit not plugged in 2. No power at outlet Little or no mist is produced 1. No water in tank 2. Unit is not level 3. Mineral deposits on Nebulizer 4. Water Tank was washed with detergent 5. Water level too low 6. Demineralization Cartridge is clogged 7. Nebulizer or fan not functioning Condensation forms around humidifier or windows 1. Mist intensity is set too high for room size or preexisting humidity level White Dust Accumulation 1. Hard water used 2. Demineralization Cartridge needs replacement CORRECTIVE ACTION Plug unit in. Check circuits, fuses, try a different outlet. Fill Water Tank. Place on a level surface. Clean Nebulizer per instructions. Rinse thoroughly with clean water. Wipe dry. Add water to Water Tank. Remove Cartridge and restart machine. If mist resumes, replace with a new Cartridge (Model DC-102). See Warranty. Reduce output level or shut off humidifier. Use distilled water or a Demineralization Cartridge. Replace Demineralization Cartridge (Model DC-102). 7