Honeywell HWM255 Instruction Manual - Page 2
Remove the Tank from the Power Unit. - humidifier
View all Honeywell HWM255 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
YOUR HUMIDIFIER: Tank Medicine Cup Cap Power Unit POWER MODE 45% OPERATION: POWER Continuous Run High Power Low Power Water Tray Base SET-UP: • Press the Power button once to start the humidifier on High Power, Continuous Run. • Press the Power button a second time to change to Low Power, Continuous Run. • Press the Power button a third time to turn the humidifier OFF. MODE: SET HUMIDITY Set Humidity Note: We recommend that the humidifier be disinfected prior to first use. Please see WEEKLY CLEANING instructions. • Select a firm, level and flat location. For proper air flow, locate the unit at least six inches (15 cm) from any wall. Place the humidifier on a water resistant surface, as water can damage furniture and some flooring. Honeywell will not accept responsibility for property damage caused by water spillage. FILLING: • Remove the Tank from the Power Unit. • Turn the Tank over and unscrew the Cap. • Fill the Tank with cool water. • Reinstall the Cap. Do not overtighten. • Install the Tank back onto the Power Unit. • Press the Mode button until the Set Humidity icon blinks. The desired Humidity Level will be displayed. • Use the Up and Down arrow buttons to set a desired humidity level between 40% to 85%. • After the desired humidity level is set, the Humidity Level icon will stop blinking and the current room humidity will appear. • The humidifier will turn off shortly after the desired humidity level is reached and the Power light above the display will blink. • The humidifier will turn back on when the humidity level drops below the desired humidity level. The Power light will stop blinking and remain lit. 2